Difference between revisions of "AxelEVB-Lite-Adapter (AxelLite)"
DevWikiAdmin (talk | contribs) m (→Boot mode selection) |
DevWikiAdmin (talk | contribs) m |
||
| Line 13: | Line 13: | ||
** JTAG connector | ** JTAG connector | ||
** dip-switch for boot mode selection | ** dip-switch for boot mode selection | ||
| − | + | * routes the signals from the AxelLite pins to the AxelEVB-Lite mating connectors | |
== Block diagram == | == Block diagram == | ||
| − | |||
Revision as of 15:19, 10 April 2014
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Contents
Introduction[edit | edit source]
Axel Lite requires a dedicated adapter to be plugged to the AxelEVB-Lite carrier board. This adapter:
- provides the SODIMM socket for the AxelLite SOM
- provides the following additional features:
- microSD slot (for SD boot)
- JTAG connector
- dip-switch for boot mode selection
- routes the signals from the AxelLite pins to the AxelEVB-Lite mating connectors
Block diagram[edit | edit source]
Connectors' pinout[edit | edit source]
J6 - SODIMM connector[edit | edit source]
J1, J2, J3 - AxelEVB-Lite mating connectors[edit | edit source]
J4 - JTAG[edit | edit source]
J5 - MicroSD[edit | edit source]
Boot mode selection[edit | edit source]
For further details, please refer to Axel Lite boot options
