Changes

Jump to: navigation, search

AxelEVB-Lite

1,272 bytes added, 10:55, 3 December 2019
→‎Axel Lite
{{ImportantMessage|text=This page provides information for the AxelEVB-Lite carrier board model S-EVBA1000C1R (BOM 1.0.4), provided with XELK kits version 2.1.0 and above.
 
For AxelEVB-Lite revision 0 manufactured before the release of XELK 2.1.0, please refer to [[AxelEVB-Lite_rev.0|this page]].
}}
 
 
{{InfoBoxTop}}
{{AppliesToAxel}}
{{AppliesToAxelLite}}
{{AppliesToAxelEsatta}}
{{InfoBoxBottom}}
[[File:Axelevb-lite-01.png|500px|frameless|border]]==Introduction==
==Introduction==AxelEVB-Lite is a carrier board designed to host [[File:Axel Ultra SOM-evb-lite-revA 02.jpg|Axel Ultra]] and [[Axel Lite SOM500px|Axel Lite]] (through an adapter) SoMs. It exports some specific peripherals connectors and acts as an adaptation board used in combination with [[:Category:Dacuframeless|Dacuborder]] carrier board.
{{ImportantMessage|text=This page provides information for the AxelEVB-Lite is a carrier board model S-EVBA1000C1R designed to host [[:Category:AxelUltra|AXEL ULTRA]] and [[:Category:AxelLite|AXEL LITE]] (BOM 1.0.4through an adapter), provided with XELK kits version 2SoMs.1.0 It exports some specific peripherals connectors and above. If you have a acts as an adaptation board from a previous version of the XELK kit (older than 2.1.0), please contact used in combination with [[mailto:support-axel@dave.eu support-axel@dave.euCategory:Dacu|Dacu]]carrier board.}}
==Block Diagram==
The following picture shows Axel-EVB-Lite's block diagram:
[[File:Axelevb-lite-block diagram.png|700px|frameless|border|centre]]
== Features ==
* 1x USB OTG,1x USB HOST
* Serial port (RS232)
* JTAG
* HDMI connector
* SATA connector
|-
|37, 38, 39, 40 || SH_CAM || Shield to Ground || -
|-
|}
 
=== MIPI camera connector - J53 ===
 
J53 is a 33-pin 0.50mm pitch ZIF connector
 
The following table reports the connector's pinout:
 
{| class="wikitable"
|-
!Pin#
!Pin name
!Function
!Notes
|-
|1 || CSI_CLK0P || - || -
|-
|2 || CSI_CLK0M || - || -
|-
|4 || CSI_D0P || - || -
|-
|5 || CSI_D0M || - || -
|-
|7 || CSI_D1P || - || -
|-
|8 || CSI_D1M || - || -
|-
|10 || CSI_D2P || - || -
|-
|11 || CSI_D2M || - || -
|-
|13 || CSI_D3P || - || -
|-
|14 || CSI_D3M || - || -
|-
|16 || DSI_D1P || - || -
|-
|17 || DSI_D1M || - || -
|-
|19 || DSI_D0P || - || -
|-
|20 || DSI_D0M || - || -
|-
|22 || DSI_CLK0P || - || -
|-
|23 || DSI_DCK0M || - || -
|-
|3, 6, 9, 12<br>15, 18, 21, 24 || DGND || - || -
|-
|25 || KEY_COL3/I2C2_SCL || - || -
|-
|26 || KEY_ROW3/I2C2_SDA || - || -
|-
|27, 28 || 3.3V || - || -
|-
|29 || GPIO_19 || - || -
|-
|30 || GPIO_18 || - || -
|-
|31 || GPIO_16 || - || -
|-
|32, 33 || 5V || - || -
|-
|}
|}
=== IPU1_CSI0 LVDS0 - J19 J54 ===
J19 J54 is a 25x210x2 DF13A-pin 2.54mm pitch vertical 20DP header. The following table reports the connector's pinout:
{| class="wikitable"
!Notes
|-
|1, 2 ||3.3V_LCD0 || +3.3V || -|-|3, 4, 7, 10,<br>13, 16, 19, 21, 22 ||DGND || Ground || -|-|5 || LVDS0_TX0_N || TX0- || -|-|6 || LVDS0_TX0_P || TX0+ || -|-|9 || LVDS0_TX1_P || TX1+ || -|-|8 || LVDS0_TX1_N || TX1- || -|-|11 || LVDS0_TX2_N|| TX2- || -|-|12|| LVDS0_TX2_P|| TX2+ || -|-|14 || LVDS0_CLK_N || Clock- || -|-|15 || LVDS0_CLK_P || Clock+ || -|-|17 || LVDS0_P17 || - || -|-|18 ||LVDS0_P18 || - || -|-|20 || LVDS0_P20 || - || -|-|} === IPU1_CSI0 - J19 === J19 is a 25x2-pin 2.54mm pitch vertical header. The following table reports the connector's pinout: {| class="wikitable" |-!Pin# !Pin name!Function!Notes|-|1, 2, 6, 15, 24<br>29, 40, 49,50 || DGND || Ground || -
|-
|3, 5, 7, 17, 19<br>31, 33, 35 || N.C. || Not connected || -
=== Pin strip connectors ===
 
==== J-PROG-MICRO1 ====
 
J-PROG-MICRO1 is a 3x2-pin, 2.54mm pitch header, pinstrip connector. The following table reports the connector's pinout:
 
{| class="wikitable"
|-
!Pin#
!Pin name
!Function
!Notes
|-
|1 || BKGD_JM60|| - || -
|-
|2 || DGND|| Ground || -
|-
|3, 5 || N.C. || - || -
|-
|4 || RST_JM60|| - || -
|-
|6 || VIN_USB|| - || -
|-
|}
==== J-PROG-PMIC1 ====
|1 || 2V8-4V5|| - || -
|-
|2 || MIC_PROG_GATE_CTRlPMIC_PROG_GATE_CTRl|| - || -
|-
|3 || DGND|| Ground || -
!Notes
|-
|1 || - || - || Connetted Connected to pin 3
|-
|2 || DGND|| Ground|| -
|-
|3 || - || - || Connetted Connected to pin 1
|-
|4, 6, 8, 10,<br>12, 14, 16 || NVCC_CSI_EXT|| - || -
!Notes
|-
|1 || - || - || Connetted Connected to pin 3
|-
|2 || DGND|| Ground|| -
|-
|3 || - || - || Connetted Connected to pin 1
|-
|4, 6, 8, 10,<br>12, 14, 16 || NVCC_EIM_EXT|| - || -
|}
==== MIPI CSI - JP7 ====
 
JP7 is a 8x2-pin 2.54mm pitch header pinstrip connector. The following table reports the connector's pinout:
 
{| class="wikitable"
|-
!Pin#
!Pin name
!Function
!Notes
|-
|1 || CSI_D3P || Data3 + ||
|-
|2, 5, 8, 11,<br> 14, 16 || DGND|| Ground|| -
|-
|3 || CSI_D3N || Data3- ||
|-
|4 || CSI_D2P|| Data2+ || -
|-
|6 || CSI_D2M|| Data2-|| -
|-
|7 || CSI_D1P|| Data1+|| -
|-
|9 || CSI_D1M|| Data1- || -
|-
|13 || CSI_CLK0P|| Clock+ || -
|-
|15 || CSI_CLK0M|| Clock- || -
|-
|}
==== EXPANSION CONNECTOR - JP8 ====
|}
==Boot configurations == MIPI DSI The AxelEVB- JP11 Lite carrier board can host two different SoM's, [[:Category:AxelUltra|Axel Ultra]] and [[:Category:AxelLite|Axel Lite]]. The following sections detail boot configuration options, which differ depending on the SoM. ===Axel Ultra======= uSD card ==== Dip-switch configuration: <pre>S5[1..8] : On Off On On On On Off OffS6[1..8] : Off Off On On Off On On OnS7[1..8] : Off Off On On On On On On S8[1..8] : On Off On On Off On On OnS9[1..2] : Off Off</pre>
JP11 is a 8x2-pin 2.54mm pitch header pinstrip connector. The following table reports the connector's pinout:==== SPI NOR flash ====
{| class="wikitable" |Dip-switch configuration:!Pin# !Pin name<pre>!FunctionS5[1..8] : On On Off Off On On Off Off !NotesS6[1..8] : Off Off On On Off On On On|-S7[1..8] : Off Off On Off Off Off On Off|S8[1, 2, 7, ..8,<br> 12, 13, 15, 16 || DGND || Ground || |-|3 || DSI_D1M || Data1 - || |-|4 || DSI_CLOCK0M || Clock - |||-|5 || DSI_D1P || Data1 + |||-|6 || DSI_CLOCK0P ] : On Off On On Off On On || Clock + ||On|-S9[1..2] : Off Off|9 || DSI_DOP|| Data0 + |||-|10 || NVCC_AXEL_I</O_3.3V/1.8|| - ||pre>|-===Axel Lite===|11 || DSI_D0M|| Data0 In this case, it is required to use the [[AxelEVB- |||Lite-Adapter (AxelLite)|14 || SW4_xV/1specific revision A adapter]] to plug the SoM.8V || Regarding the boot options, please refer to [[AxelEVB- |||Lite-Adapter_(AxelLite)#Revision_A_2|}this section]].
==SchematicsTechnical documents ==
===Schematics===* ORCAD: http://wwwmirror.dave.eu/systemaxel/hw/filesAxelEVB/arearev-riservataA/axelevb-litelite_S-EVBA1000C1R_1.0.98.3-XELK-dsndsn_.zip* PDF: http://wwwmirror.dave.eu/systemaxel/hw/filesAxelEVB/arearev-riservataA/axelevb-litelite_S-SEVBA1000C1R_1.EVBA1000C0R-0.9.38.pdf
===BOM===* AxelEVB-Lite: http://wwwmirror.dave.eu/systemaxel/hw/filesAxelEVB/arearev-riservataA/axelevbAXELEVB-lite_BOM_SLITE_S.EVBA1000C0R_0EVBA1000C1R.91.30.CSV_8.zip
===Layout===* http://wwwmirror.dave.eu/systemaxel/hw/filesAxelEVB/arearev-riservataA/axelevb-lite_CS151613_assem_viewlite_S-EVBA1000C1R_CS151613A_AssemView.pdf
===Mechanical===* DXF: http://wwwmirror.dave.eu/systemaxel/hw/filesAxelEVB/arearev-riservataA/axelevb-lite_2D_CS151613lite-S-EVBA1000C1R_CS151613A-2D.dxf_.zip* IDF (3D): http://wwwmirror.dave.eu/systemhw/filesaxel/areaAxelEVB/rev-riservataA/axelevb-lite_3D_CS151613lite-S-EVBA1000C1R_CS151613A-3D.idf_.zip
U0001
Bureaucrats, dave_user, Administrators
4,650
edits
Retrieved from "https://wiki.dave.eu/index.php/Special:MobileDiff/3411...9222"

Navigation menu