3,260
edits
Changes
m
==== J-PROG-MICRO1 ====
J-PROG-MICRO1 is a 3x2-pin, 2.54mm pitch header, pinstrip connector. The following table reports the connector's pinout:
{| class="wikitable"
|-
!Pin#
!Pin name
!Function
!Notes
|-
|1 || BKGD_JM60|| - || -
|-
|2 || DGND|| Ground || -
|-
|3, 5 || N.C. || - || -
|-
|4 || RST_JM60|| - || -
|-
|6 || VIN_USB|| - || -
|-
|}
==== MIPI CSI - JP7 ====
JP7 is a 8x2-pin 2.54mm pitch header pinstrip connector. The following table reports the connector's pinout:
{| class="wikitable"
|-
!Pin#
!Pin name
!Function
!Notes
|-
|1 || CSI_D3P || Data3 + ||
|-
|2, 5, 8, 11,<br> 14, 16 || DGND|| Ground|| -
|-
|3 || CSI_D3N || Data3- ||
|-
|4 || CSI_D2P|| Data2+ || -
|-
|6 || CSI_D2M|| Data2-|| -
|-
|7 || CSI_D1P|| Data1+|| -
|-
|9 || CSI_D1M|| Data1- || -
|-
|13 || CSI_CLK0P|| Clock+ || -
|-
|15 || CSI_CLK0M|| Clock- || -
|-
|}
|-
|}
==== MIPI DSI - JP11 ====
JP11 is a 8x2-pin 2.54mm pitch header pinstrip connector. The following table reports the connector's pinout:
{| class="wikitable"
|-
!Pin#
!Pin name
!Function
!Notes
|-
|1, 2, 7, 8,<br> 12, 13, 15, 16 || DGND || Ground ||
|-
|3 || DSI_D1M || Data1 - ||
|-
|4 || DSI_CLOCK0M || Clock - ||
|-
|5 || DSI_D1P || Data1 + ||
|-
|6 || DSI_CLOCK0P || Clock + ||
|-
|9 || DSI_DOP|| Data0 + ||
|-
|10 || NVCC_AXEL_I/O_3.3V/1.8|| - ||
|-
|11 || DSI_D0M|| Data0 - ||
|-
|14 || SW4_xV/1.8V || - ||
→Pin strip connectors
=== Pin strip connectors ===
==== J-PROG-PMIC1 ====
|}
==== EXPANSION CONNECTOR - JP8 ====
|-
|13 || GPIO_18/PMIC_INT_B || - ||
|-
|}
