3,260
edits
Changes
m
→CAM interface - J16
J16 is a 36-pin 0.50mm pitch vertical connector.
The following table reports the connector's pinout:
{| class="wikitable"
|-
!Pin#
!Pin name
!Function
!Notes
|-
|1 || SPI_MOSI_IPU2_CS1<br>[CSI_D15] || CAM DATA[15] || -
|-
|2 || CSI_D14|| CAM DATA[14] || -
|-
|3 || SPI1_CS_IPU2_CSI1|| - || -
|-
|4 || CMOS_RST#_IPU2_CSI1|| CMOS Reset || -
|-
|5 || SPI1_CLK_IPU2_CS1|| - || -
|-
|6 || SPI1_MISO_IPU2_CS1|| - || -
|-
|7 || CMOS_I2C_SDA|| I2C DATA || -
|-
|8 || CMOS_I2C_SCL|| I2C CLOCK || -
|-
|9 || EIM_DA9|| CAM DATA[0] || -
|-
|10 || EIM_DA8|| CAM DATA[1] || -
|-
|11 || DGND|| Ground || -
|-
|12 || DGND|| Ground || -
|-
|13 || EIM_DA7|| CAM DATA[2] || -
|-
|14 || EIM_DA6|| CAM DATA[3] || -
|-
|15 || EIM_DA5|| CAM DATA[4] || -
|-
|16 || EIM_DA4|| CAM DATA[5] || -
|-
|17 || EIM_DA3|| CAM DATA[6] || -
|-
|18 || EIM_DA2|| CAM DATA[7] || -
|-
|19 || EIM_DA1|| CAM DATA[8] || -
|-
|20 || EIM_DA0|| CAM DATA[9] || -
|-
|21 || CSI1_D10|| CAM DATA[10] || -
|-
|22 || CSI1_D11|| CAM DATA[11] || -
|-
|23 || CSI1_D12|| CAM DATA[12] || -
|-
|24 || CSI1_D13|| CAM DATA[13] || -
|-
|25 || CSI1_CAM_HS|| CAM Hsync || -
|-
|26 || CSI1_CAM_VS|| CAM Vsync || -
|-
|27 || DGND|| Ground || -
|-
|28 || CSI1_CAM_PCLK|| CAM Pixel Clock || -
|-
|29 || DGND|| Ground || -
|-
|30 || R_CMOS_CLK_IPU2_CSI1|| CMOS Clock || -
|-
|31 || DGND|| Ground || -
|-
|32 || N.C.|| - || -
|-
|33 || N.C.|| - || -
|-
|34 || CAM_VCC_IPU2_CSI1|| Power Supply || -
|-
|35 || CAM_VCC_IPU2_CSI1|| Power Supply || -
|-
|36 || CAM_VCC_IPU2_CSI1|| Power Supply || -
|-
|37, 38, 39, 40 || SH_CAM || Shield to Ground || -
|-
|}
=== MIPI camera connector - J53 ===
J16 is a 33-pin 0.50mm pitch ZIF connector
The following table reports the connector's pinout:
