Difference between revisions of "Application Notes (Bora)"

From DAVE Developer's Wiki
Jump to: navigation, search
m (AN-BELK-001: Asymmetric Multiprocessing (AMP) on Bora – Linux + FreeRTOS)
 
(7 intermediate revisions by 4 users not shown)
Line 1: Line 1:
{{InfoBoxTop}}
+
 
{{Applies To Bora}}
 
{{InfoBoxBottom}}
 
  
 
= Introduction =
 
= Introduction =
Line 9: Line 7:
 
= Application notes =
 
= Application notes =
  
== AN-BELK-001: Asymmetric Multiprocessing (AMP) on Bora – Linux + FreeRTOS ==
+
* [[AN-BELK-001: Asymmetric Multiprocessing (AMP) on Bora – Linux FreeRTOS]]
 
+
* [[AN-BELK-002: Trace on the Bora AMP (Linux + FreeRTOS) system]]
This application note describe how to build the software components required to set up asymmetric multi-processing (AMP for short) configuration required to run Linux OS on first Cortex-A9 core and FreeRTOS on second Cortex-A9 core of the Zynq SOC.
+
* [[AN-BELK-003: Interfacing DDR3 SDRAM to PL]]
Two different examples are provided. The first one – HelloWorld – shows basic functionalities while the second – RPMsg-based application – exploits more sophisticated techniques to handle inter-processors communication and synchronization.
+
* [[AN-BELK-004: Interfacing BoraEVB/BoraXEVB to TFT LCD display]]
 
+
* [[AN-BELK-005: Interfacing BoraEVB to thin film electroluminescent display]]
Please download the  [http://www.dave.eu/sites/default/files/files/an-belk-001-amp-linux-freertos.pdf application note in PDF format].
+
* [[AN-BELK-006: Enabling dual Gigabit Ethernet support on BoraEVB]]
 
 
=== Additional resources ===
 
 
 
* http://www.wiki.xilinx.com/Multi-OS+Support+%28AMP+%26+Hypervisor%29
 
 
 
== AN-BELK-002: Trace on the Bora AMP (Linux + FreeRTOS) system ==
 
 
 
This application note describes how to configure TRACE32 ® debugger to support debug and trace of Linux running on the first Zynq core, and FreeRTOS, running on the second Zynq core. This application note is the proper continuation of the previously releseased AN-BELK-001 “AMP on Bora - Linux and FreeRTOS”, which describes how to build the software components required to set up asymmetric multi-processing (AMP)” on Bora.
 
 
 
Please download the  [http://www.dave.eu/sites/default/files/files/an-belk-002-amp-trace.pdf  application note in PDF format].
 

Latest revision as of 14:12, 4 April 2019