Changes

Jump to: navigation, search

AXEL ULite and SBC Lynx Embedded Linux Kit (XUELK)

1,445 bytes added, 08:55, 29 November 2016
XUELK 1.0.0
{| class="wikitable"
!
!colspan="23" | XUELK version
|-
|Release number
|0.9.0
|1.0.0
|1.1.0
|-
|Release type
|Major
|Major
|Minor
|-
|Status
|Beta
|Released
|Released
|-
|March 2016
|August 2016
|November 2016
|-
|Release notes
|[[#XUELK 0.9.0|0.9.0]]
|[[#XUELK 1.0.0|1.0.0]]
|[[#XUELK 1.1.0|1.1.0]]
|-
|PCB version
|SBC Lynx CS214515
|SBC Lynx CS214515A<br>
(AXELULite CS184015) [1]
|SBC Lynx CS214515A<br>
(AXELULite CS184015) [1]
|[[ConfigID_and_UniqueID|ConfigIDs]] (core/interfaces)
|0x00000008/0x0000000E
|0x00000008/0x0000000E<br>
0x0000000C/NA<br>
(0x0000000B/NA) [1]
|0x00000008/0x0000000E<br>
0x0000000C/NA<br>
Virtual Box 5.0.26<br/>
Vagrant 1.8.1
|xuelk-1.1.0, tested with:<br/>
Virtual Box 5.1.10<br/>
Vagrant 1.8.7
|-
|U-Boot version/release
|U-Boot 2015.04/xuelk-0.9.0
|U-Boot 2015.04/xuelk-1.0.0
|U-Boot 2015.04/xuelk-1.1.0
|-
|Linux version/release
|Linux 3.14.52/xuelk-0.9.0
|Linux 3.14.52/xuelk-1.0.0
|Linux 3.14.52/xuelk-1.1.0
|-
|Drivers
ADC<br/>
RTC<br/>
|valign="top"|UART<br/>
Ethernet<br/>
SD/MMC<br/>
USB Host<br/>
USB Device<br/>
NOR Flash<br/>
NAND Flash<br/>
ADC<br/>
RTC<br/>
CAN<br/>
DWM<br/>
LCD<br/>
|valign="top"|UART<br/>
Ethernet<br/>
|-
|NXP BSP version
|3.14.52_1.1.0_ga
|3.14.52_1.1.0_ga
|3.14.52_1.1.0_ga
|-
|Build System
|Yocto Fido (1.8)
|Yocto Fido (1.8)
|Yocto Fido (1.8)
=== Release notes ===
 
==== XUELK 1.1.0 ====
 
===== Notes =====
 
Minor update on XUELK 1.1.0:
* add some useful networking support (on both Linux and file system)
* fix XUELK-1.0.0 shutdown issue
* fix XUELK-1.0.0 MVM network-manager issues
* minor fixes and enhancement
 
===== Known issues and limitations =====
 
The following table reports the known limitations of this XUELK release:
 
 
{| class="wikitable"
|-
!Issue
!Description
|-
|Rebooting in Linux may hang
|Software reboot on Linux may hang (without rebooting the board) when root file system in on SD/MMC
|-
|USB OTG Current Limit
|USB OTG current limit is set at 75mA in Host mode
|-
|Low Power Idle not supported
|Low Power Idle is not supported in this release
|-
|Failing mount of root file system on microSD card
|Some commercial microSD cards occasionally prevent the target from mounting the root file system stored on themselves. microSD cards delivered along with XUELK do not exhibit this problem.
|}
 
==== XUELK 1.0.0 ====
746
edits

Navigation menu