Bureaucrats, dave_user, Administrators
4,650
edits
Changes
→Release notes
=== Release notes ===
==== XUELK 1.0.9.0 ====
===== Notes =====
First beta stable release.with support for SBC Lynx revision A and Axel ULite
===== Known issues and limitations =====
The following table reports the known limitations of this XUELK release:
{| class="wikitable"
|USB OTG Current Limit
|USB OTG current limit is set at 75mA in Host mode
|-
|Low Power Idle not supported
|Low Power Idle is not supported in this release
|-
|DDR3 Frequency limited at 306 MHzXUELK environment fixup for SD boot<br/>on SBC Lynx|The DDR3 RAM frequency is limited To boot with the XUELK SD card, user may need to execute the following commands at 306 MHz in this releaseu-boot prompt<br/><pre>setenv mmcroot /dev/mmcblk0p2setenv mmc_loadfdt 'fatload mmc 0:1 ${fdtaddr} imx6ul-lynx-som000c.dtb'saveenv</pre>
|-
|}
==== XUELK 10.09.0 ====
===== Notes =====
First stable beta release with support for SBC Lynx revision A and Axel ULite.
===== Known issues and limitations =====
The following table reports the known limitations of this XUELK release:
{| class="wikitable"
|USB OTG Current Limit
|USB OTG current limit is set at 75mA in Host mode
|-
|LDO Mode not supported
|LDO Mode is not supported in this SW release
|-
|Low Power Idle not supported
|Low Power Idle is not supported in this release
|-
|XUELK environment fixup for SD boot<br/>on SBC LynxDDR3 Frequency limited at 306 MHz|To boot with the XUELK SD card, user may need to execute the following commands The DDR3 RAM frequency is limited at u-boot prompt<br/><pre>setenv mmcroot /dev/mmcblk0p2setenv mmc_loadfdt 'fatload mmc 0:1 ${fdtaddr} imx6ul-lynx-som000c.dtb'saveenv</pre>306 MHz in this release
|-
|}