Bureaucrats, dave_user, Administrators
4,650
edits
Changes
no edit summary
** 3: 3.3V
** 4: GND
*on host side start your favorite terminalthat will be used to interact with the target's serial console; communication parameters are 11520-8-N-1
*connect the system to Ethernet LAN by plugging cable into connector J16
*connect 12V power supply to J35 connector; J35 pinout is:
**1: GND
**2: VIN.
===First boot===
Once power has been applied, U-Boot bootloader will be executed from the SPI NOR flash. Boot messages will be printed out on the serial console. U-Boot automatically runs the autoboot macro, that loads the kernel and
launches it with the options for mounting the root fi le
system from the mmcblk0p2 partition. At the end of the
boot process, a demo application is launched and you can
interact with the system using the touchscreen.
Moreover, the Linux shell is available on the serial console.
Lastly, both telnet and ssh services are available to connect
to the system through the network.
Please refer to Appendix 6.3 for an example of the boot
messages.
==Related Documents ==
TBD