Difference between revisions of "AXEL ULite adapter"

From DAVE Developer's Wiki
Jump to: navigation, search
(Created page with "TBD ==Introduction== ==Boot configurations via ''GPIO override''== ==Low-power RTC example== ==Power consumption measurement circuit== vedi http://davewiki.lan.dave.eu/wiki/...")
 
Line 1: Line 1:
 
TBD
 
TBD
 
==Introduction==
 
==Introduction==
 +
AXELULite adapter is a board that DAVE Embedded Systems made available to make initial development on AXELULite-based systems easier.
 +
 +
The following image shows a simplified block diagram.
 +
TBD
 +
 +
The following sections illustrate in more detail what it integrates and how to use it.
 +
==Installation==
 +
AXELULite adapter has to be interposed between the carrier board and AXELULite SOM as shown by the following picture.
 +
TBD
 +
Once hardware
 
==Boot configurations via ''GPIO override''==
 
==Boot configurations via ''GPIO override''==
 +
As described [[link|here]]
 
==Low-power RTC example==
 
==Low-power RTC example==
 
==Power consumption measurement circuit==
 
==Power consumption measurement circuit==

Revision as of 09:11, 10 June 2016

TBD

Introduction[edit | edit source]

AXELULite adapter is a board that DAVE Embedded Systems made available to make initial development on AXELULite-based systems easier.

The following image shows a simplified block diagram. TBD

The following sections illustrate in more detail what it integrates and how to use it.

Installation[edit | edit source]

AXELULite adapter has to be interposed between the carrier board and AXELULite SOM as shown by the following picture. TBD Once hardware

Boot configurations via GPIO override[edit | edit source]

As described here

Low-power RTC example[edit | edit source]

Power consumption measurement circuit[edit | edit source]

vedi http://davewiki.lan.dave.eu/wiki/index.php/Prodotti_-_DAVE_-_AXELULite_Adapter_%28XULADP%29