Changes

Jump to: navigation, search
Options for AXELULite users
From the point of view of boot configuration programming, AXELULite portfolio consists of two basic categories of ordering codes:
#part numbers in the form TBD have eFUSEs not programmed
#the other ordering codes have eFUSE programmed as detailed in the following tablesection.
For convenience, the products belonging to the first category will be denoted as ''NP-eFUSE''. The others will be referred as ''P-eFUSE''.
Users who ===P-eFUSE ordering codes===P-EFUSE codes address users that don't need to have the full control of the boot process should choose configuration and can use one of the NP-eFUSE part numberspreconfigured options. This allows them These configurations are intended to be able to*program eFUSEs by themselves*implement circuitry at carrier board level to exploit satisfy most commonly used boot schemes. Nevertheless, ''GPIO override''*decide users are recommended to understand the limitations of such configurations in order to use verify they meet system requirements''GPIO override'' approach even for mass productionFrom the point of view of boot flow, two cases
P-EFUSE codes address users that don't need full control of boot configuration and can use one of the preconfigured options. All of these ordering codes have:
*<code>SDMMC_MFG_DISABLE</code> set to 0: ''manufacture mode'' is '''enabled'''
*<code>BT_FUSE_SEL</code> is set to 1, meaning that that eFUSEs have been programmed
*<code>FORCE_INTERNAL_BOOT</code> is set to 0, in order to let <code>BOOT_MODE</code> pins to select main boot mode.*TBD lasciare attivo <code>SEC_CONFIG[1:0]</code> are set to 01 to allow any program image, even if authentication fails ('''this opption is intended for non-secure products''')*<code>eFuse 0x470[4]</code> is set to 1, to disable UART serial downloader sulle UARTs ???download. 
{|class="wikitable" style="text-align: center;"
P-eFUSE products yet provides a moderated freedom in terms of configurability and openness. Generally speaking, this may affect system security negatively. '''Hence it is strongly recommended that system integrator does a detailed assessment in case he/she is considering the use of P-eFUSE SOMs, especially if security concerns are relevant'''.
===NP-eFUSE ordering codes===Users who need to have the '''full control''' of the boot process should choose one of the NP-eFUSE part numbers. This allows them to be able to*program eFUSEs by themselves*implement circuitry at carrier board level to exploit ''GPIO override''*decide to use ''GPIO override'' approach even for mass production. ====AXELULite adapter====
To ease the development effort of the customers working with NP-eFUSE SOMs, DAVE Embedded Systems has made available a specific adapter board. For more information please see [[AXELULite adapter|this page]].
==References==
{{reflist}}
4,650
edits

Navigation menu