AXEL ULite SOM/AXEL ULite Evaluation Kit/Getting started/Boot Configurations
< AXEL ULite SOM | AXEL ULite Evaluation Kit| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2021/07/19 | New documentation layout | ||
Contents
Boot ConfigurationsEdit
AXEL ULite Evaluation Board is built upon i.MX6UL processor.
The following sections detail boot configuration options, which differ depending on the SoM.
Available optionsEdit
Boot modes can be selected by J18 switches which acts directly on J2.20 BOOT_MODE0 configuration pin.
J18.1 switch is mapped to BOOT_MODE0 pin allowing different boot modes.
| Boot options order code | Jumper mounted | Jumper not mounted |
|---|---|---|
| Boot from NOR | NOR | SD |
| Boot from NAND | NAND | SD |
Inserting a jumper on the left position header, the internal storage device is selected as a primary boot device: i.e. NOR SPI or NAND flash.
