AXEL Lite SOM/AXEL Lite Hardware/Power and Reset/JTAG
< AXEL Lite SOM | AXEL Lite Hardware
Revision as of 14:33, 16 September 2020 by U0007 (talk | contribs) (Created page with "<section begin=History/> {| style="border-collapse:collapse; " !colspan="4" style="width:100%; text-align:left"; border-bottom:solid 2px #ededed"|History |- !style="border-le...")
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Sep 2020 | New layout documentation | |
On board JTAG connector[edit | edit source]
JTAG signals are routed to a dedicated connector on the AXEL Lite PCB.
The connector is placed on the top side of the PCB, at the upper-right corner (please see the picture below).
J7 - Connector's pinout[edit | edit source]
J7 footprint mates with Samtec FSI-110-03-G-S connector. The following table reports the connector's pinout:
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| 1 | DGND | - | - |
| 2 | JTAG_TCK | - | - |
| 3 | JTAG_TMS | - | 10K pull-up to 3V3 (BOARD_PGOOD driven signal) |
| 4 | JTAG_TDO | - | 10K pull-up to 3V3 (BOARD_PGOOD driven signal) |
| 5 | JTAG_TDI | - | 10K pull-up to 3V3 (BOARD_PGOOD driven signal) |
| 6 | JTAG_nTRST | - | 10K pull-up to 3V3 (BOARD_PGOOD driven signal) |
| 7 | CPU_PORn | - | - |
| 8 | N.C. | - | - |
| 9 | N.C. | - | - |
| 10 | JTAG_VREF | - | 3V3 (BOARD_PGOOD driven signal) |
