AXEL Lite SOM/AXEL Lite Hardware/Peripherals/SPI

From DAVE Developer's Wiki
Jump to: navigation, search
History
Issue Date Notes
2020/10/27 New documentation layout



Peripheral SPI[edit | edit source]

The Enhanced Configurable Serial Peripheral Interface (ECSPI) is a full-duplex, synchronous, four-wire serial communication block.

Description[edit | edit source]

The SPI interface available on AXEL Lite is based on i.MX6 ECSPI blocks.

The ECSPI port supports the following standards and features:

  • Full-duplex synchronous serial interface
  • Master/Slave configurable
  • Four Chip Select (SS) signals to support multiple peripherals
  • Transfer continuation function allows unlimited length data transfers
  • 32-bit wide by 64-entry FIFO for both transmit and receive data
  • Polarity and phase of the Chip Select (SS) and SPI Clock (SCLK) are configurable
  • Direct Memory Access (DMA) support
  • Max operation frequency up to the reference clock frequency

Pin mapping[edit | edit source]

The Pin mapping is described in the Pinout table section