Difference between revisions of "AXEL Lite SOM/AXEL Lite Evaluation Kit/Interfaces and Connectors/UARTs"
(→Description) |
(→UARTs interface) |
||
| Line 30: | Line 30: | ||
| − | [[File:AXEL Lite-EVB- | + | [[File:AXEL Lite-EVB-DB9-connector.png|thumb|center| 500px|DB9 configuration]] |
===Signals === | ===Signals === | ||
| Line 87: | Line 87: | ||
|} | |} | ||
| − | The J19 and J20 jumpers are used to configure the UART mode, as | + | The J19 and J20 jumpers are used to configure the UART mode, as reported below: |
| − | reported below: | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 112: | Line 111: | ||
| 14-16 || open || open || closed | | 14-16 || open || open || closed | ||
|} | |} | ||
| + | |||
| + | [[File:AXEL Lite-EVB-UART5-connector.png|thumb|center| 500px|J19 and J20 connectors]] | ||
[[File: AXEL_Lite_-_EVK-_UART5_configuration_jumpers.jpg|500px|thumb|UART5 jumper configuration|center]] | [[File: AXEL_Lite_-_EVK-_UART5_configuration_jumpers.jpg|500px|thumb|UART5 jumper configuration|center]] | ||
Revision as of 09:22, 28 October 2020
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Oct 2020 | First DESK release | |
Contents
UARTs interface[edit | edit source]
Description[edit | edit source]
The UARTs interface available on the Evaluation Kit are mapped to the following connectors:
- J25 is a 6x1x2.54 pitch vertical header for the UART4 port. This is a Digilent Pmod™ Compatible connector for the UART Pmod™ Compatiblemodule (6-Pin Pmod™ Compatible Connector Digilent Pmod™ Interface Specification Type 4 UART)
- J21 is a standard DB9 male connector for the configurable UART5 port. The board provides some configuration options for the selection of the UART mode (RS232/RS422/RS485 with auto-direction)
Signals[edit | edit source]
The following tables describes the interface signals
UART4[edit | edit source]
| Pin# | SOM Pin# | Pin name | Pin function | Pin Notes |
|---|---|---|---|---|
| 1 | J10.50 | PMOD_A0 | Clear to send | |
| 2 | J10.89 | PMOD_A1 | Transmit data | |
| 3 | J10.91 | PMOD_A2 | Receive data | |
| 4 | J10.40 | PMOD_A3 | Request to send | |
| 5 | - | DGND | Ground | |
| 6 | - | 3V3 | +3.3 V |
UART5[edit | edit source]
| Pin# | SOM Pin# | Pin name | RS-232 | RS-422 | RS-485 |
|---|---|---|---|---|---|
| 1 | - | Not connected | Not connected | Not connected | Not connected |
| 2 | J10.95 | UART5_A | UART2 receive line | UART5_A | UART5_A |
| 3 | J10.93 | UART5_Y | UART2 transmit line | UART5_Y | UART5_A |
| 4 | - | Not connected | Not connected | Not connected | Not connected |
| 5 | - | DGND | Ground | Ground | Ground |
| 6 | - | Not connected | Not connected | Not connected | Not connected |
| 7 | J10.105 | UART5_Z | UART2 Request To Send | UART5_Z | UART5_B |
| 8 | J10.107 | UART5_B | UART2 Clear To Send | UART5_B | UART5_B |
| 9 | - | Not connected | Not connected | Not connected | Not connected |
The J19 and J20 jumpers are used to configure the UART mode, as reported below:
| Jumper | RS232 mode | RS422 mode | RS485 mode |
|---|---|---|---|
| 1-3 | open | open | closed |
| 5-7 | open | closed | open |
| 9-11 | open | closed | open |
| 2-4 | open | open | closed |
| 6-8 | open | closed | closed |
| 10-12 | open | closed | closed |
| 13-15 | open | open | closed |
| 14-16 | open | open | closed |
Device mapping[edit | edit source]
- UART4 is mapped to
/dev/ttymxc3device in Linux - UART5 is mapped to
/dev/ttymxc4device in Linux
Device usage[edit | edit source]
- UART4 can be used with a PMOD adapter or with a TTL peripheral
- UART5 is a MultiProtocol that support (after harware Jumper configuration) the RS232, RS4222 or RS485 protocols. The related device tree file has to be properly configured too for enabling the GPIO transceiver configuration.
