AXEL Lite SOM/AXEL Lite Evaluation Kit/Interfaces and Connectors/Power Supply

From DAVE Developer's Wiki
Jump to: navigation, search
History
Issue Date Notes
2020/10/27 New documentation layout



Power Supply[edit | edit source]

Description[edit | edit source]

Power is provided through the J2 connector. Power voltage range is +[12-24 V].

J2 is a two pins MSTBA 2.5/2-G-5.08 Phoenix connector.

Power Supply connector

Signals[edit | edit source]

The following table describes the interface signals:

Pin# Pin function Pin Notes
1 DGND Ground
2 VIN +[12-24 V]

Power LED[edit | edit source]

DL1 is a green LED (placed near battery holder) shows the status of the power input. This LED is ON when a valid power supply is present.