AXEL Lite SOM/AXEL Lite Evaluation Kit/Interfaces and Connectors/Power Supply
< AXEL Lite SOM | AXEL Lite Evaluation Kit
Revision as of 13:33, 20 October 2020 by U0007 (talk | contribs) (Created page with "<section begin=History/> {| style="border-collapse:collapse; " !colspan="4" style="width:100%; text-align:left"; border-bottom:solid 2px #ededed"|History |- !style="border-le...")
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Oct 2020 | First DESK release | |
Power Supply[edit | edit source]
Description[edit | edit source]
Power is provided through the J2 connector. Power voltage range is +[12-24 V].
J2 is a two pins MSTBA 2.5/2-G-5.08 Phoenix connector.
Signals[edit | edit source]
The following table describes the interface signals:
| Pin# | Pin function | Pin Notes |
|---|---|---|
| 1 | DGND | Ground |
| 2 | VIN | +[12-24 V] |
Power LED[edit | edit source]
DL1 is a green LED (placed near battery holder) shows the status of the power input. This LED is ON when a valid power supply is present.
