AXEL Lite SOM/AXEL Lite Evaluation Kit/Interfaces and Connectors/CAN
< AXEL Lite SOM | AXEL Lite Evaluation Kit
Revision as of 08:28, 16 October 2020 by U0007 (talk | contribs) (Created page with "<section begin=History/> {| style="border-collapse:collapse; " !colspan="4" style="width:100%; text-align:left"; border-bottom:solid 2px #ededed"|History |- !style="border-le...")
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| 1.0.0 | Oct 2020 | First DESK release | |
CAN[edit | edit source]
Description[edit | edit source]
The CAN interface available on the Evaluation Kit at the connector J23.
J23 is a 3x2x2.54mm header that provides the CAN bus port compatible with the CAN 2.0B protocol. The CAN transceiver is implemented on the AXEL LITE SOM.
Signals[edit | edit source]
The following table describes the interface signals:
| Pin# | SOM Pin# | Pin name | Pin function | Pin Notes |
|---|---|---|---|---|
| 1,2 | - | N.A. | N.C. | Bus termination |
| 3 | J2.44 | CAN_M | Low bus line | |
| 4 | J4.44 | CAN_P | High bus line | |
| 5 | - | CAN_SHIELD | Shield | |
| 6 | - | DGND | Ground |
Device mapping[edit | edit source]
CAN device is mapped to can0 device in Linux. The peripheral can be configured using ifconfig and ip link utilities.
Device usage[edit | edit source]
Inserting a jumper on pins 1 and 2 enables 120Ω bus termination.
