View source for AN-BMSC-001: Running Wind River VxWorks 6.9 on Bora

===VxWorks bootrom based boot sequence===
The following dump shows the messages printed out on console in case of VxWorks bootrom based boot sequence:

<pre>
                            VxWorks System Boot


Copyright 1984-2015  Wind River Systems, Inc.





CPU: Xilinx Zynq-7000 ARMv7
Version: VxWorks 6.9
BSP version: 6.9/2
Creation date: Mar 25 2015 17:48:05




Press any key to stop auto-boot...
 1
auto-booting...


boot device          : fs
unit number          : 0
processor number     : 0
host name            : bora2
file name            : /tffs0/vxWorks
inet on ethernet (e) : 192.168.0.77
host inet (h)        : 192.168.0.13
gateway inet (g)     : 192.168.0.254
user (u)             : target
ftp password (pw)    : vxTarget
flags (f)            : 0x0
target name (tn)     : xlnx_zynq7k

Loading /tffs0/vxWorks...2189460 + 488768
Starting at 0x200000...


usrNetDevNameGet: no network device
usrNetDevNameGet: no network device

Adding 8271 symbols for standalone.
usrNetDevNameGet: no network device
wdbCommDevInit: could not get device name
wdbConfig: error configuring WDB communication interface


                VxWorks

Copyright 1984-2015  Wind River Systems, Inc.

             CPU: Xilinx Zynq-7000 ARMv7
    Runtime Name: VxWorks
 Runtime Version: 6.9
     BSP version: 6.9/2
         Created: Mar 26 2015 12:05:55
ED&R Policy Mode: Deployed
   WDB Comm Type: WDB_COMM_END
             WDB: Agent configuration failed.


Trying to create RAM disk /bd/0
Instantiating /bd/0 as rawFs,  device = 0x20001
OK. Trying to format RAM disk /bd/0 as dosFs
Formatting /bd/0 for DOSFS
-> Instantiating /bd/0 as rawFs, device = 0x20001
Formatting...OK.
usbTargRbcCmdDataUpdate: BytesPerBlock is 512,NumOfBlock is 20480
usbTargInitialize() returned OK
usbTargTcdAttach() returned OK
targChannel = 0x1
usbTargEnable() returned OK
FSL TCD initialized

->
</pre>