ADD-ON DVI-RX

Info Box Applies to NaonEVB-Mid

ADD-ON_DVI-RX is a small plug-in board that implements DVI-to-RGB electrical conversion. It is compatible with NaonEVB-Mid carrier board. It is built upon TFP401A component.

Schematics

Please note that Orcad CIS is required to get all the information about BOM variants included in .dsn files. PDF files show the view of the default BOM variant used to manufacture the board. Components that are not populated are denoted as "Do Not Stuff".

• Orcad: https://www.dave.eu/system/files/area-riservata/add-on-dvi-rx-schematics-dsn.zip
• PDF: https://www.dave.eu/system/files/area-riservata/add-on_dvi_rx-schematics.pdf

BOM

• https://www.dave.eu/system/files/area-riservata/add-on-dvi-rx-BOM.zip

Layout

• https://www.dave.eu/system/files/area-riservata/add-on-dvi-rx-CS101612_component_view.pdf

Mechanical

• DXF: https://www.dave.eu/system/files/area-riservata/add-on-dvi-rx-CS101612-dxf.zip
• IDF (3D): https://www.dave.eu/system/files/area-riservata/add-on-dvi-rx-CS101612-3D.zip