Difference between revisions of "ADD-ON DVI-RX"

From DAVE Developer's Wiki
Jump to: navigation, search
m
 
Line 15: Line 15:
  
 
PDF files show the view of the default BOM variant used to manufacture the board. Components that are not populated are denoted as "Do Not Stuff".}}
 
PDF files show the view of the default BOM variant used to manufacture the board. Components that are not populated are denoted as "Do Not Stuff".}}
* Orcad: http://www.dave.eu/system/files/area-riservata/add-on-dvi-rx-schematics-dsn.zip
+
* Orcad: https://www.dave.eu/system/files/area-riservata/add-on-dvi-rx-schematics-dsn.zip
* PDF: http://www.dave.eu/system/files/area-riservata/add-on_dvi_rx-schematics.pdf
+
* PDF: https://www.dave.eu/system/files/area-riservata/add-on_dvi_rx-schematics.pdf
 
==BOM==
 
==BOM==
* http://www.dave.eu/system/files/area-riservata/add-on-dvi-rx-BOM.zip
+
* https://www.dave.eu/system/files/area-riservata/add-on-dvi-rx-BOM.zip
 
==Layout==
 
==Layout==
* http://www.dave.eu/system/files/area-riservata/add-on-dvi-rx-CS101612_component_view.pdf
+
* https://www.dave.eu/system/files/area-riservata/add-on-dvi-rx-CS101612_component_view.pdf
 
==Mechanical==
 
==Mechanical==
* DXF: http://www.dave.eu/system/files/area-riservata/add-on-dvi-rx-CS101612-dxf.zip
+
* DXF: https://www.dave.eu/system/files/area-riservata/add-on-dvi-rx-CS101612-dxf.zip
* IDF (3D): http://www.dave.eu/system/files/area-riservata/add-on-dvi-rx-CS101612-3D.zip
+
* IDF (3D): https://www.dave.eu/system/files/area-riservata/add-on-dvi-rx-CS101612-3D.zip

Latest revision as of 12:31, 17 October 2018

Info Box
Naon-evb-mid top.png Applies to NaonEVB-Mid


Dmt-dvi rx-top-view.jpg

ADD-ON_DVI-RX is a small plug-in board that implements DVI-to-RGB electrical conversion. It is compatible with NaonEVB-Mid carrier board. It is built upon TFP401A component.


Dmt-dvi rx-plugged-front-view.jpg

Schematics[edit | edit source]

200px-Emblem-important.svg.png Please note that Orcad CIS is required to get all the information about BOM variants included in .dsn files.

PDF files show the view of the default BOM variant used to manufacture the board. Components that are not populated are denoted as "Do Not Stuff".

200px-Emblem-important.svg.png

BOM[edit | edit source]

Layout[edit | edit source]

Mechanical[edit | edit source]