Bureaucrats, dave_user, Administrators
8,243
edits
Changes
→Connections
This section describes how to quick start the Evaluation Kit. The picture below shows the ORCA SBC ''inside'' into the Evaluation Kit:
[[File:ORCA-SB8MU5000EVK.png|500px|thumb|center| ORCA SBC connections]]
The system is programmed to automatically boot Linux at power up, loading the bootloader, the kernel and device tree image and the root file system from the SD card memory.
To connect to the system:
* insert the SD card into the micro SD slot
* connect the USB Type C power adapter to J3 on the board
* connect the USB to TTL UART adapter to the J35 connector on the SBC and connect the USB side connector to an USB port on your computer
*** username: root
*** empty password
'''Warning''': please, pay attention to the debug cable header connection, see the picture here below:
[[File:ORCA_SBC-usb-to-serial.png|600px|center| FTDI USB to serial debug cable]]
== First boot ==