<pre class="workstation-terminal">
...
...
[ 4.532401] fec 30be0000.ethernet eth0: registered PHC device 0
...
[ 8.010083] Micrel KSZ9031 Gigabit PHY 30be0000.ethernet-1:07: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=30be0000.ethernet-1:07, irq=POLL)
...
</pre>
<pre class="workstation-terminal">
...
...
[ 12.113452] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 12.121253] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
...
</pre>