Changes

← Older edit

Power consumption (SBC Lynx)

300 bytes removed, 09:31, 27 January 2017

→‎Idle configurations

*power probe #2 is connected to the input power rail of the PMIC NXP PF3000 (nominal voltage is 3.75V); this, in turn, powers the processor subsystem.

=== Heavy load configurations===

Measurements have been performed on the following platform ~~(also denoted as testbed1 in the rest of the document)~~:

* SBC Lynx rev.A (S-XUBB0110C1R)

* System software: XUELK 1.1.0

** uSD card: read/write/verify operations

** Ethernet: <code>iperf</code> TCP test running

=== Idle configurations ===

* SBC Lynx rev.A (S-XUBB0110C1R)

* System software: XUELK 1.1.0

** U-Boot: U-Boot 2015.04-xuelk-1.1.0 (Nov 25 2016 - 16:43:19), Build: jenkins-XUELK_U-Boot-8

*** bootcmd: mw.l 21b0020 800; run net_nand

** Kernel: Linux sbc-lynx 3.14.52-xuelk-1.1.0-00026-g88e5473 #36 SMP PREEMPT Tue Dec 13 15:20:14 CET 2016 armv7l GNU/Linux

*** branch: http://gitlab.lan.dave.eu/lynx/linux-2.6-imx/commits/dev-1.1.0-powerConsumption

** RFS: R:\opt\nfsroot\lynx\xuelk-1.1.0-networking

* root file system stored in NAND flash

* CAN transceiver not present

===Heavy load configurations===

Measurements have been performed on the following platform ~~(also denoted as ''testbed1'' in the rest of the document)~~:

* SBC Lynx rev.0 (S-XUBB0000C0R) equipped with a plug-in board for 24-bit RGB LCD interfacing

*LCD p/n: KOE TX11D06vm2Apa (https://www.koe-europe.com/doc/TX11D06VM2APA.pdf)

U0001

Bureaucrats, dave_user, Administrators

4,650

edits

DAVE Developer's Wiki β

Changes

Power consumption (SBC Lynx)

DAVE Developer's Wiki ^β