3,260
edits
Changes
m
→DivaEVB-Lite plugged on Dacu
=== DivaEVB-Lite plugged on Dacu ===
This section describes how to quick start a Diva system composed of a Diva SOM plugged into the DivaEVB-Lite systemand then mounted on the Dacu carrier board, provided that it is programmed according to DIVELK configuration.
# connect the serial cable, provided with the board, to J6the J25 pin-strip connector on the Dacu board
# connect this cable to PC COM port through a NULL-modem cable (not provided)
# start your favourite terminal software on PC; communication parameters are:
#* stop bits: 1
#* parity: none
# (optional) to connect the system to Ethernet LAN, please plug cable on connector J7of the DivaEVB-Lite# connect a 12Vcc power supply to J8JP2 on the Dacu board
Once power has been applied, U-Boot bootloader will be executed and and the following messages will be printed on serial console (please note that messages may vary for different U-Boot releases)