Open main menu

DAVE Developer's Wiki β

Changes

DESK-MX8M-L/General/Booting from NFS

43,344 bytes added, 10:33, 27 February 2023
Target configuration
<pre>
=> setenv serverip 192.168.0.120125=> setenv ipaddr 192.168.0.12189
</pre>
* <code>serverip</code> is the IP address of the host machine running the tftp/nfs server
* <code>ipaddr</code> is the IP address of the target
 
For using the DVDK Virtual Machine, a static IP address configuration has been selected, to the U-Boot variable <code>ip_dyn</code> has to be set to '''no''':
=> setenv ip_dyn no
The ''kernel'' and ''device tree'' files have to be selected
 <pre>=> setenv bootfile /tftpboot/desk-mx-l/Image=> setenv loadk 'tftpboot ${loadaddr} ${serverip}:${bootfile}'=> setenv loadfdt 'tftpboot ${fdt_addr} ${serverip}:${fdt_file}'</pre>
ORCA has its dtb file <code>imx8mp-mito8mplus-cb1001.dtb</code>
while MITO 8M Mini has its own ''dtb'' file <code>imx8mm-mito8mmini.dtb</code>
setenv fdt_file /tftpboot/desk-mx-l/imx8mm-mito8mmini.dtb
 
finally, the ''root file system'' directory on the Virtual Machine should be configured to let the kernel find the '''INIT'''
<pre>=> setenv rootpath nfsroot /home/dvdk/desk-mx-l/rfs/desk-mx8m-l</pre>
To run this configuration just issue the '''netboot''' command which firstly downloads the kernel and device tree using the tftp protocol
 
<pre class="workstation-terminal">
=> print netboot
netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} ${loadaddr} ${image}; if test ${boot_fit} = yes || test ${boot_fit} = try; then bootm ${loadaddr}; else if ${get_cmd} ${fdt_addr} ${fdt_file}; then booti ${loadaddr} - ${fdt_addr}; else echo WARN: Cannot load the DT; fi; fi;
</pre>
 
Here below the complete bootlog from ''nfs'':
<pre class="mw-collapsible mw-collapsed workstation-terminal">
u-boot=> run netbootBooting from net ...Using ethernet@30be0000 deviceTFTP from server 192.168.0.13; our IP address is 192.168.0.89Filename 'desk-mx8m/linux/desk-mx8m-l-2.0.0_Image'.Load address: 0x40480000Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################################### 2.4 MiB/sdoneBytes transferred = 28219904 (1ae9a00 hex)Using ethernet@30be0000 deviceTFTP from server 192.168.0.13; our IP address is 192.168.0.89Filename 'desk-mx8m/linux/desk-mx8m-l-2.0.0_imx8mm-mito8mmini.dtb'.Load address: 0x43000000Loading: ######### 1.6 MiB/sdoneBytes transferred = 41062 (a066 hex)## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Using Device Tree in place at 0000000043000000, end 000000004300d065 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034][ 0.000000] Linux version 5.4.70-desk-mx8m-l-2.0.0 (jenkins@xenialbakery) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT Wed Feb 8 15:40:22 CET 2023[ 0.000000] Machine model: DAVE i.MX8MM MITO8MMINI board[ 0.000000] efi: Getting EFI parameters from FDT:[ 0.000000] efi: UEFI not found.[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000078000000, size 640 MiB[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool[ 0.000000] NUMA: No NUMA configuration found[ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bfffffff][ 0.000000] NUMA: NODE_DATA [mem 0xbfbd2500-0xbfbd3fff][ 0.000000] Zone ranges:[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000bfffffff][ 0.000000] Normal empty[ 0.000000] Movable zone start for each node[ 0.000000] Early memory node ranges[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000b7ffffff][ 0.000000] node 0: [mem 0x00000000b8400000-0x00000000bfffffff][ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff][ 0.000000] psci: probing for conduit method from DT.[ 0.000000] psci: PSCIv1.1 detected in firmware.[ 0.000000] psci: Using standard PSCI v0.2 function IDs[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.[ 0.000000] psci: SMC Calling Convention v1.1[ 0.000000] percpu: Embedded 24 pages/cpu s58904 r8192 d31208 u98304[ 0.000000] Detected VIPT I-cache on CPU0[ 0.000000] CPU features: detected: ARM erratum 845719[ 0.000000] CPU features: detected: GIC system register CPU interface[ 0.000000] Speculative Store Bypass Disable mitigation not required[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515072[ 0.000000] Policy zone: DMA32[ 0.000000] Kernel command line: console=ttymxc1,115200 root=/dev/nfs ip=192.168.0.89 nfsroot=192.168.0.13:/home/dvdk/desk-mx-l/rfs/desk-mx8m-l,v3,tcp[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off[ 0.000000] Memory: 1368548K/2093056K available (16764K kernel code, 1254K rwdata, 6620K rodata, 2880K init, 1015K bss, 69148K reserved, 655360K cma-reserved)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1[ 0.000000] rcu: Preemptible hierarchical RCU implementation.[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.[ 0.000000] Tasks RCU enabled.[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode[ 0.000000] GICv3: 128 SPIs implemented[ 0.000000] GICv3: 0 Extended SPIs implemented[ 0.000000] GICv3: Distributor has no Range Selector support[ 0.000000] GICv3: 16 PPIs implemented[ 0.000000] GICv3: no VLPI support, no direct LPI support[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000[ 0.000000] ITS: No ITS available, not enabling LPIs[ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x44c with crng_init=0[ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys).[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns[ 0.000003] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns[ 0.000369] Console: colour dummy device 80x25[ 0.000432] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000)[ 0.000441] pid_max: default: 32768 minimum: 301[ 0.000514] LSM: Security Framework initializing[ 0.000569] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)[ 0.000580] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)[ 0.001718] ASID allocator initialised with 32768 entries[ 0.001785] rcu: Hierarchical SRCU implementation.[ 0.002653] EFI services will not be available.[ 0.002808] smp: Bringing up secondary CPUs ...[ 0.003162] Detected VIPT I-cache on CPU1[ 0.003186] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000[ 0.003217] CPU1: Booted secondary processor 0x0000000001 [0x410fd034][ 0.003602] Detected VIPT I-cache on CPU2[ 0.003618] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000[ 0.003635] CPU2: Booted secondary processor 0x0000000002 [0x410fd034][ 0.004041] Detected VIPT I-cache on CPU3[ 0.004055] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000[ 0.004073] CPU3: Booted secondary processor 0x0000000003 [0x410fd034][ 0.004125] smp: Brought up 1 node, 4 CPUs[ 0.004134] SMP: Total of 4 processors activated.[ 0.004139] CPU features: detected: 32-bit EL0 Support[ 0.004145] CPU features: detected: CRC32 instructions[ 0.010710] CPU: All CPU(s) started at EL2[ 0.010730] alternatives: patching kernel code[ 0.012157] devtmpfs: initialized[ 0.018166] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns[ 0.018184] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)[ 0.034322] pinctrl core: initialized pinctrl subsystem[ 0.035023] DMI not present or invalid.[ 0.035279] NET: Registered protocol family 16[ 0.042061] DMA: preallocated 256 KiB pool for atomic allocations[ 0.042091] audit: initializing netlink subsys (disabled)[ 0.042358] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1[ 0.043200] cpuidle: using governor menu[ 0.043636] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.[ 0.044426] Serial: AMBA PL011 UART driver[ 0.044489] imx mu driver is registered.[ 0.044510] imx rpmsg driver is registered.[ 0.049801] imx8mm-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver[ 0.072571] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages[ 0.072582] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages[ 0.072590] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages[ 0.072597] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages[ 0.073460] cryptd: max_cpu_qlen set to 1000[ 0.076520] ACPI: Interpreter disabled.[ 0.077681] iommu: Default domain type: Translated[ 0.077826] vgaarb: loaded[ 0.078117] SCSI subsystem initialized[ 0.078468] usbcore: registered new interface driver usbfs[ 0.078502] usbcore: registered new interface driver hub[ 0.078552] usbcore: registered new device driver usb[ 0.079689] mc: Linux media interface: v0.10[ 0.079718] videodev: Linux video capture interface: v2.00[ 0.079808] pps_core: LinuxPPS API ver. 1 registered[ 0.079814] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>[ 0.079832] PTP clock support registered[ 0.079972] EDAC MC: Ver: 3.0.0[ 0.080765] No BMan portals available![ 0.080982] QMan: Allocated lookup table at (____ptrval____), entry count 65537[ 0.081228] No QMan portals available![ 0.081592] No USDPAA memory, no 'fsl,usdpaa-mem' in device-tree[ 0.082008] FPGA manager framework[ 0.082097] Advanced Linux Sound Architecture Driver Initialized.[ 0.082489] Bluetooth: Core ver 2.22[ 0.082517] NET: Registered protocol family 31[ 0.082522] Bluetooth: HCI device and connection manager initialized[ 0.082531] Bluetooth: HCI socket layer initialized[ 0.082537] Bluetooth: L2CAP socket layer initialized[ 0.082549] Bluetooth: SCO socket layer initialized[ 0.083225] clocksource: Switched to clocksource arch_sys_counter[ 0.083390] VFS: Disk quotas dquot_6.6.0[ 0.083435] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[ 0.083589] pnp: PnP ACPI: disabled[ 0.089056] thermal_sys: Registered thermal governor 'step_wise'[ 0.089060] thermal_sys: Registered thermal governor 'power_allocator'[ 0.089389] NET: Registered protocol family 2[ 0.089704] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)[ 0.089734] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)[ 0.089842] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)[ 0.090066] TCP: Hash tables configured (established 16384 bind 16384)[ 0.090144] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)[ 0.090185] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)[ 0.090332] NET: Registered protocol family 1[ 0.090655] RPC: Registered named UNIX socket transport module.[ 0.090661] RPC: Registered udp transport module.[ 0.090667] RPC: Registered tcp transport module.[ 0.090670] RPC: Registered tcp NFSv4.1 backchannel transport module.[ 0.091034] PCI: CLS 0 bytes, default 64[ 0.091727] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available[ 0.092094] kvm [1]: IPA Size Limit: 40bits[ 0.092692] kvm [1]: GICv3: no GICV resource entry[ 0.092697] kvm [1]: disabling GICv2 emulation[ 0.092714] kvm [1]: GIC system register CPU interface enabled[ 0.092775] kvm [1]: vgic interrupt IRQ1[ 0.092866] kvm [1]: Hyp mode initialized successfully[ 0.095844] Initialise system trusted keyrings[ 0.095958] workingset: timestamp_bits=44 max_order=19 bucket_order=0[ 0.102081] squashfs: version 4.0 (2009/01/31) Phillip Lougher[ 0.102732] NFS: Registering the id_resolver key type[ 0.102756] Key type id_resolver registered[ 0.102760] Key type id_legacy registered[ 0.102770] nfs4filelayout_init: NFSv4 File Layout Driver Registering...[ 0.102788] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.[ 0.103152] 9p: Installing v9fs 9p2000 file system support[ 0.116490] Key type asymmetric registered[ 0.116497] Asymmetric key parser 'x509' registered[ 0.116525] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)[ 0.116531] io scheduler mq-deadline registered[ 0.116536] io scheduler kyber registered[ 0.121732] EINJ: ACPI disabled.[ 0.130488] imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2[ 0.130503] imx-sdma 302c0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin[ 0.138599] mxs-dma 33000000.dma-controller: initialized[ 0.139836] Bus freq driver module loaded[ 0.145167] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled[ 0.147313] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 32, base_baud = 5000000) is a IMX[ 0.147641] imx8mm-pinctrl 30330000.pinctrl: pin MX8MM_IOMUXC_UART3_RXD already requested by 30860000.serial; cannot claim for 30880000.serial[ 0.147650] imx8mm-pinctrl 30330000.pinctrl: pin-145 (30880000.serial) status -22[ 0.147657] imx8mm-pinctrl 30330000.pinctrl: could not request pin 145 (MX8MM_IOMUXC_UART3_RXD) from group uart3grp on device 30330000.pinctrl[ 0.147666] imx-uart 30880000.serial: Error applying setting, reverse things back[ 0.147679] imx-uart: probe of 30880000.serial failed with error -22[ 0.147856] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 34, base_baud = 1500000) is a IMX[ 1.178433] printk: console [ttymxc1] enabled[ 1.188043] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).[ 1.194676] [drm] No driver support for vblank timestamp query.[ 1.200671] imx-drm soc@0:bus@32c00000:display-subsystem: bound imx-lcdif-crtc.0 (ops lcdif_crtc_ops)[ 1.210086] [drm] Initialized imx-drm 1.0.0 20120507 for soc@0:bus@32c00000:display-subsystem on minor 0[ 1.229513] loop: module loaded[ 1.234796] imx ahci driver is registered.[ 2.271254] gpmi-nand 33002000.nand-controller: DMA timeout, last DMA[ 2.277711] gpmi-nand 33002000.nand-controller: Show GPMI registers :[ 2.284165] gpmi-nand 33002000.nand-controller: offset 0x000 : 0x03800000[ 2.290962] gpmi-nand 33002000.nand-controller: offset 0x010 : 0x00000000[ 2.297758] gpmi-nand 33002000.nand-controller: offset 0x020 : 0x00000000[ 2.304554] gpmi-nand 33002000.nand-controller: offset 0x030 : 0x00000000[ 2.311350] gpmi-nand 33002000.nand-controller: offset 0x040 : 0x00000000[ 2.318145] gpmi-nand 33002000.nand-controller: offset 0x050 : 0x00000000[ 2.324941] gpmi-nand 33002000.nand-controller: offset 0x060 : 0x010c000c[ 2.331738] gpmi-nand 33002000.nand-controller: offset 0x070 : 0x00020101[ 2.338532] gpmi-nand 33002000.nand-controller: offset 0x080 : 0x50000000[ 2.345328] gpmi-nand 33002000.nand-controller: offset 0x090 : 0x23023336[ 2.352123] gpmi-nand 33002000.nand-controller: offset 0x0a0 : 0x000000ff[ 2.358919] gpmi-nand 33002000.nand-controller: offset 0x0b0 : 0xfe000005[ 2.365715] gpmi-nand 33002000.nand-controller: offset 0x0c0 : 0x00000100[ 2.372510] gpmi-nand 33002000.nand-controller: offset 0x0d0 : 0x05020000[ 2.379305] gpmi-nand 33002000.nand-controller: Show BCH registers :[ 2.385666] gpmi-nand 33002000.nand-controller: offset 0x000 : 0x00000000[ 2.392460] gpmi-nand 33002000.nand-controller: offset 0x010 : 0x00000010[ 2.399256] gpmi-nand 33002000.nand-controller: offset 0x020 : 0x00000000[ 2.406054] gpmi-nand 33002000.nand-controller: offset 0x030 : 0x00000000[ 2.412848] gpmi-nand 33002000.nand-controller: offset 0x040 : 0x00000000[ 2.419645] gpmi-nand 33002000.nand-controller: offset 0x050 : 0x00000000[ 2.426441] gpmi-nand 33002000.nand-controller: offset 0x060 : 0x00000000[ 2.433238] gpmi-nand 33002000.nand-controller: offset 0x070 : 0xe4e4e4e4[ 2.440034] gpmi-nand 33002000.nand-controller: offset 0x080 : 0x070a4080[ 2.446830] gpmi-nand 33002000.nand-controller: offset 0x090 : 0x10da4080[ 2.453626] gpmi-nand 33002000.nand-controller: offset 0x0a0 : 0x070a4080[ 2.460421] gpmi-nand 33002000.nand-controller: offset 0x0b0 : 0x10da4080[ 2.467224] gpmi-nand 33002000.nand-controller: offset 0x0c0 : 0x070a4080[ 2.474019] gpmi-nand 33002000.nand-controller: offset 0x0d0 : 0x10da4080[ 2.480815] gpmi-nand 33002000.nand-controller: offset 0x0e0 : 0x070a4080[ 2.487611] gpmi-nand 33002000.nand-controller: offset 0x0f0 : 0x10da4080[ 2.494406] gpmi-nand 33002000.nand-controller: offset 0x100 : 0x00000000[ 2.501202] gpmi-nand 33002000.nand-controller: offset 0x110 : 0x00000000[ 2.507998] gpmi-nand 33002000.nand-controller: offset 0x120 : 0x00000000[ 2.514794] gpmi-nand 33002000.nand-controller: offset 0x130 : 0x00000000[ 2.521590] gpmi-nand 33002000.nand-controller: offset 0x140 : 0x00000000[ 2.528389] gpmi-nand 33002000.nand-controller: offset 0x150 : 0x20484342[ 2.535185] gpmi-nand 33002000.nand-controller: offset 0x160 : 0x01010000[ 2.541981] gpmi-nand 33002000.nand-controller: offset 0x170 : 0x00000000[ 2.548781] gpmi-nand 33002000.nand-controller: BCH Geometry :[ 2.548781] GF length : 0[ 2.548781] ECC Strength : 0[ 2.548781] Page Size in Bytes : 0[ 2.548781] Metadata Size in Bytes : 0[ 2.548781] ECC Chunk0 Size in Bytes: 0[ 2.548781] ECC Chunkn Size in Bytes: 0[ 2.548781] ECC Chunk Count : 0[ 2.548781] Payload Size in Bytes : 1024[ 2.548781] Auxiliary Size in Bytes: 128[ 2.548781] Auxiliary Status Offset: 0[ 2.548781] Block Mark Byte Offset : 0[ 2.548781] Block Mark Bit Offset : 0[ 2.600025] nand: No NAND device found[ 2.603850] gpmi-nand: probe of 33002000.nand-controller failed with error -110[ 2.613234] libphy: Fixed MDIO Bus: probed[ 2.618149] tun: Universal TUN/TAP device driver, 1.6[ 2.623384] CAN device driver interface[ 2.628304] thunder_xcv, ver 1.0[ 2.631573] thunder_bgx, ver 1.0[ 2.634830] nicpf, ver 1.0[ 2.638373] pps pps0: new PPS source ptp0[ 2.647608] Freescale FM module, FMD API version 21.1.0[ 2.653094] Freescale FM Ports module[ 2.656763] fsl_mac: fsl_mac: FSL FMan MAC API based driver[ 2.662490] fsl_dpa: FSL DPAA Ethernet driver[ 2.666990] fsl_advanced: FSL DPAA Advanced drivers:[ 2.671966] fsl_proxy: FSL DPAA Proxy initialization driver[ 2.677645] fsl_oh: FSL FMan Offline Parsing port driver[ 2.683853] hclge is initializing[ 2.687171] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version[ 2.694404] hns3: Copyright (c) 2017 Huawei Corporation.[ 2.699762] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI[ 2.706816] e1000: Copyright (c) 1999-2006 Intel Corporation.[ 2.712599] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k[ 2.718435] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.[ 2.724393] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k[ 2.731361] igb: Copyright (c) 2007-2014 Intel Corporation.[ 2.736972] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k[ 2.744807] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.[ 2.750880] sky2: driver version 1.30[ 2.755481] VFIO - User Level meta-driver version: 0.3[ 2.762493] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 2.769042] ehci-pci: EHCI PCI platform driver[ 2.773525] ehci-platform: EHCI generic platform driver[ 2.778939] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[ 2.785176] ohci-pci: OHCI PCI platform driver[ 2.789666] ohci-platform: OHCI generic platform driver[ 2.795594] usbcore: registered new interface driver uas[ 2.800959] usbcore: registered new interface driver usb-storage[ 2.807038] usbcore: registered new interface driver usbserial_generic[ 2.813588] usbserial: USB Serial support registered for generic[ 2.819624] usbcore: registered new interface driver ftdi_sio[ 2.825392] usbserial: USB Serial support registered for FTDI USB Serial Device[ 2.832737] usbcore: registered new interface driver usb_serial_simple[ 2.839285] usbserial: USB Serial support registered for carelink[ 2.845398] usbserial: USB Serial support registered for zio[ 2.851078] usbserial: USB Serial support registered for funsoft[ 2.857106] usbserial: USB Serial support registered for flashloader[ 2.863482] usbserial: USB Serial support registered for google[ 2.869421] usbserial: USB Serial support registered for libtransistor[ 2.875968] usbserial: USB Serial support registered for vivopay[ 2.881995] usbserial: USB Serial support registered for moto_modem[ 2.888285] usbserial: USB Serial support registered for motorola_tetra[ 2.894925] usbserial: USB Serial support registered for novatel_gps[ 2.901300] usbserial: USB Serial support registered for hp4x[ 2.907071] usbserial: USB Serial support registered for suunto[ 2.913013] usbserial: USB Serial support registered for siemens_mpi[ 2.919404] usbcore: registered new interface driver usb_ehset_test[ 2.927405] imx_usb 32e50000.usb: No over current polarity defined[ 2.936287] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc0[ 2.942577] i2c /dev entries driver[ 2.946741] mx6s-csi 32e20000.csi1_bridge: initialising[ 2.952504] mxc_mipi-csi 32e30000.mipi_csi: 32e30000.mipi_csi supply mipi-phy not found, using dummy regulator[ 2.962694] mxc_mipi-csi 32e30000.mipi_csi: mipi csi v4l2 device registered[ 2.969669] CSI: Registered sensor subdevice: mxc_mipi-csi.0[ 2.975355] mxc_mipi-csi 32e30000.mipi_csi: lanes: 2, hs_settle: 13, clk_settle: 2, wclk: 1, freq: 333000000[ 2.985462] Driver for 1-wire Dallas network protocol.[ 2.994643] imx2-wdt 30280000.watchdog: timeout 60 sec (nowayout=0)[ 3.001224] Bluetooth: HCI UART driver ver 2.3[ 3.005685] Bluetooth: HCI UART protocol H4 registered[ 3.010833] Bluetooth: HCI UART protocol BCSP registered[ 3.016169] Bluetooth: HCI UART protocol LL registered[ 3.021314] Bluetooth: HCI UART protocol ATH3K registered[ 3.026738] Bluetooth: HCI UART protocol Three-wire (H5) registered[ 3.033101] Bluetooth: HCI UART protocol Broadcom registered[ 3.038785] Bluetooth: HCI UART protocol QCA registered[ 3.045971] sdhci: Secure Digital Host Controller Interface driver[ 3.052167] sdhci: Copyright(c) Pierre Ossman[ 3.056724] Synopsys Designware Multimedia Card Interface Driver[ 3.063347] sdhci-pltfm: SDHCI platform and OF driver helper[ 3.069857] mmc0: CQHCI version 5.10[ 3.105013] mmc0: SDHCI controller on 30b40000.mmc [30b40000.mmc] using ADMA[ 3.112380] mmc1: CQHCI version 5.10[ 3.118688] ledtrig-cpu: registered to indicate activity on CPUs[ 3.125997] caam 30900000.crypto: device ID = 0x0a16040100000000 (Era 9)[ 3.132723] caam 30900000.crypto: job rings = 3, qi = 0[ 3.151907] caam algorithms registered in /proc/crypto[ 3.157844] caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto[ 3.165262] caam 30900000.crypto: registering rng-caam[ 3.170959] Device caam-keygen registered[ 3.180289] caam-snvs 30370000.caam-snvs: violation handlers armed - non-secure state[ 3.188806] usbcore: registered new interface driver usbhid[ 3.194404] usbhid: USB HID core driver[ 3.199760] No fsl,qman node[ 3.202664] Freescale USDPAA process driver[ 3.206868] fsl-usdpaa: no region found[ 3.210762] Freescale USDPAA process IRQ driver[ 3.220347] galcore: clk_get vg clock failed, disable vg![ 3.226067] Galcore version 6.4.3.p1.305572[ 3.232835] random: fast init done[ 3.249814] mmc0: Command Queue Engine enabled[ 3.254302] mmc0: new HS400 Enhanced strobe MMC card at address 0001[ 3.257350] random: crng init done[ 3.262356] mmcblk0: mmc0:0001 DG4008 7.28 GiB[ 3.268839] mmcblk0boot0: mmc0:0001 DG4008 partition 1 4.00 MiB[ 3.274963] mmcblk0boot1: mmc0:0001 DG4008 partition 2 4.00 MiB[ 3.281616] mmcblk0rpmb: mmc0:0001 DG4008 partition 3 4.00 MiB, chardev (237:0)[ 3.296565] [drm] Initialized vivante 1.0.0 20170808 for 38000000.gpu on minor 1[ 3.305724] hantrodec 0 : module inserted. Major = 236[ 3.311449] hantrodec 1 : module inserted. Major = 236[ 3.317379] hx280enc: module inserted. Major <235>[ 3.332940] fsl-sai 30020000.sai: failed to get mclk0 clock: -2[ 3.338882] fsl-sai 30020000.sai: failed to get mclk1 clock: -2[ 3.344826] fsl-sai 30020000.sai: failed to get mclk2 clock: -2[ 3.350756] fsl-sai 30020000.sai: failed to get mclk3 clock: -2[ 3.389416] pktgen: Packet Generator for packet performance testing. Version: 2.75[ 3.401850] NET: Registered protocol family 26[ 3.406907] NET: Registered protocol family 10[ 3.412005] Segment Routing with IPv6[ 3.415734] NET: Registered protocol family 17[ 3.420218] can: controller area network core (rev 20170425 abi 9)[ 3.426445] NET: Registered protocol family 29[ 3.430911] can: raw protocol (rev 20170425)[ 3.435190] can: broadcast manager protocol (rev 20170425 t)[ 3.440860] can: netlink gateway (rev 20190810) max_hops=1[ 3.447441] Bluetooth: RFCOMM TTY layer initialized[ 3.452342] Bluetooth: RFCOMM socket layer initialized[ 3.457511] Bluetooth: RFCOMM ver 1.11[ 3.461272] Bluetooth: BNEP (Ethernet Emulation) ver 1.3[ 3.466589] Bluetooth: BNEP filters: protocol multicast[ 3.471825] Bluetooth: BNEP socket layer initialized[ 3.476796] Bluetooth: HIDP (Human Interface Emulation) ver 1.2[ 3.482725] Bluetooth: HIDP socket layer initialized[ 3.487725] 8021q: 802.1Q VLAN Support v1.8[ 3.491928] lib80211: common routines for IEEE802.11 drivers[ 3.497707] 9pnet: Installing 9P2000 support[ 3.502008] tsn generic netlink module v1 init...[ 3.506796] Key type dns_resolver registered[ 3.512016] registered taskstats version 1[ 3.516126] Loading compiled-in X.509 certificates[ 3.542409] usb_phy_generic usbphynop1: usbphynop1 supply vcc not found, using dummy regulator[ 3.551252] usb_phy_generic usbphynop2: usbphynop2 supply vcc not found, using dummy regulator[ 3.571639] pf8x00-regulator 0-0008: PF8121A: Full layer: 3, Metal layer: 1, prog_id=0x5001[ 3.580010] pf8x00-regulator 0-0008: PF8121A found.[ 3.657114] pf8x00-regulator 0-0008: reg(0xa4) not found for 0x5001[ 3.663475] i2c i2c-0: IMX I2C adapter registered[ 3.670012] i2c i2c-1: IMX I2C adapter registered[ 3.676140] ov5640_mipi 2-003c: No pin available[ 3.680802] ov5640_mipi 2-003c: No sensor pwdn pin available[ 3.686481] ov5640_mipi 2-003c: No sensor reset pin available[ 3.692270] ov5640_mipi 2-003c: 2-003c supply DOVDD not found, using dummy regulator[ 3.700077] ov5640_mipi 2-003c: 2-003c supply DVDD not found, using dummy regulator[ 3.707796] ov5640_mipi 2-003c: 2-003c supply AVDD not found, using dummy regulator[ 3.716477] ov5640_mipi 2-003c: Read reg error: reg=300a[ 3.721805] ov5640_mipi 2-003c: Camera is not found[ 3.726852] i2c i2c-2: IMX I2C adapter registered[ 3.733400] imx6q-pcie 33800000.pcie: 33800000.pcie supply epdev_on not found, using dummy regulator[ 3.733993] pps pps0: new PPS source ptp0[ 3.742811] imx6q-pcie 33800000.pcie: PLL REF_CLK is used!.[ 3.757976] libphy: fec_enet_mii_bus: probed[ 3.766619] fec 30be0000.ethernet eth0: registered PHC device 0[ 3.773382] imx_usb 32e40000.usb: 32e40000.usb supply vbus not found, using dummy regulator[ 3.783588] imx6q-pcie 33800000.pcie: PCIe PLL locked after 20 us.[ 3.786161] imx_usb 32e50000.usb: No over current polarity defined[ 3.789839] imx6q-pcie 33800000.pcie: host bridge /soc@0/pcie@33800000 ranges:[ 3.798888] ci_hdrc ci_hdrc.1: EHCI Host Controller[ 3.803238] imx6q-pcie 33800000.pcie: IO 0x1ff80000..0x1ff8ffff -> 0x00000000[ 3.808103] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1[ 3.815497] imx6q-pcie 33800000.pcie: MEM 0x18000000..0x1fefffff -> 0x18000000[ 3.839238] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00[ 3.845468] hub 1-0:1.0: USB hub found[ 3.849250] hub 1-0:1.0: 1 port detected[ 3.854952] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 2 mkt segment 2 supported-hw 0x4 0x4[ 3.867484] mmc1: CQHCI version 5.10[ 3.871102] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO[ 3.908929] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA[ 3.917224] debugfs: Directory '30020000.sai' with parent 'SBCX_TLV320' already present![ 3.925445] asoc-simple-card sound: tlv320aic31xx-hifi <-> 30020000.sai mapping ok[ 3.933044] asoc-simple-card sound: ASoC: no DMI vendor name![ 3.964064] snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 2023-02-27T10:24:32 UTC (1677493472)[ 3.982577] mmc1: host does not support reading read-only switch, assuming write-enable[ 3.992852] mmc1: new high speed SDHC card at address 0001[ 3.998899] mmcblk1: mmc1:0001 SD32G 29.5 GiB[ 4.005589] mmcblk1: p1 p2[ 4.060371] Micrel KSZ9031 Gigabit PHY 30be0000.ethernet-1:07: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=30be0000.ethernet-1:07, irq=POLL)[ 4.833629] imx6q-pcie 33800000.pcie: Phy link never came up[ 4.839353] imx6q-pcie 33800000.pcie: failed to initialize host[ 4.845279] imx6q-pcie 33800000.pcie: unable to add pcie port.[ 9.186342] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off[ 9.193953] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready[ 9.211514] IP-Config: Guessing netmask 255.255.255.0[ 9.216597] IP-Config: Complete:[ 9.219853] device=eth0, hwaddr=36:ab:ed:3f:ab:7e, ipaddr=192.168.0.89, mask=255.255.255.0, gw=255.255.255.255[ 9.230306] host=192.168.0.89, domain=, nis-domain=(none)[ 9.236151] bootserver=255.255.255.255, rootserver=192.168.0.13, rootpath=[ 9.243592] cfg80211: Loading compiled-in X.509 certificates for regulatory database[ 9.254449] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'[ 9.261074] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2[ 9.267592] ALSA device list:[ 9.269704] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db[ 9.272685] #0: SBCX_TLV320[ 9.310240] VFS: Mounted root (nfs filesystem) readonly on device 0:22.[ 9.318649] devtmpfs: mounted[ 9.322519] Freeing unused kernel memory: 2880K[ 9.331558] Run /sbin/init as init process[ 9.915182] systemd[1]: systemd 243.2+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)[ 9.937166] systemd[1]: Detected architecture arm64. Welcome to NXP i.MX Release Distro 5.4-zeus (zeus)! [ 10.021031] systemd[1]: Set hostname to <desk-mx8mm> .[ 11.105003] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.[ 11.165610] systemd[1]: /lib/systemd/system/syslogd.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/syslogd.pid → /run/syslogd.pid; please update the unit file accordingly.[ 11.243642] systemd[1]: /lib/systemd/system/rpcbind.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/rpcbind.sock → /run/rpcbind.sock; please update the unit file accordingly.[ 11.286125] systemd[1]: /lib/systemd/system/klogd.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/klogd.pid → /run loadk loadfdt nfsargs addip addcons addmisc/klogd.pid; booti ${loadaddr} please update the unit file accordingly.[ 11.848815] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.[ 11.861274] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)[ 11.871753] systemd[1]: Created slice system-getty.slice.[ OK ] Created slice system-getty.slice.[ OK ] Created slice system-serial\x2dgetty.slice.[ OK ] Created slice User and Session Slice.[ OK ] Started Dispatch Password …ts to Console Directory Watch.[ OK ] Started Forward Password R…uests to Wall Directory Watch.[ OK ] Reached target Paths.[ OK ] Reached target Remote File Systems.[ OK ] Reached target Slices.[ OK ] Reached target Swap.[ OK ] Listening on Syslog Socket.[ OK ] Listening on initctl Compatibility Named Pipe.[ OK ] Listening on Journal Audit Socket.[ OK ] Listening on Journal Socket (/dev/log).[ OK ] Listening on Journal Socket.[ OK ] Listening on Network Service Netlink Socket.[ OK ] Listening on udev Control Socket.[ OK ] Listening on udev Kernel Socket. Mounting Huge Pages File System... Mounting POSIX Message Queue File System... Mounting Kernel Debug File System... Mounting Temporary Directory (/tmp)... Starting File System Check on Root Device... Starting Journal Service... Mounting Kernel Configuration File System... Starting Apply Kernel Variables... Starting udev Coldplug all Devices...[ OK ] Mounted Huge Pages File System.[ OK ] Mounted POSIX Message Queue File System.[ OK ] Mounted Kernel Debug File System.[ OK ] Mounted Temporary Directory (/tmp).[ OK ] Started Journal Service.[ OK ] Started File System Check on Root Device.[ OK ] Mounted Kernel Configuration File System.[ OK ] Started Apply Kernel Variables. Starting Remount Root and Kernel File Systems...[ OK ] Started Remount Root and Kernel File Systems. Starting Flush Journal to Persistent Storage... Starting Create Static Device Nodes in /dev...[ 12.644713] systemd-journald[250]: Received client request to flush runtime journal.[ OK ] Started Flush Journal to Persistent Storage.[ OK ] Started udev Coldplug all Devices.[ OK ] Started Create Static Device Nodes in /dev.[ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Starting udev Kernel Device Manager...[ OK ] Mounted /var/volatile. Starting Load/Save Random Seed...[ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories...[ OK ] Started Load/Save Random Seed.[ OK ] Started udev Kernel Device Manager.[ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown...[ OK ] Started Update UTMP about System Boot/Shutdown.[ OK ] Started Network Time Synchronization.[ OK ] Reached target System Initialization.[ 13.884727] imx-sdma 302b0000.dma-controller: loaded firmware 4.5[ OK ] Started Daily Cleanup of Temporary Directories.[ OK ] Reached target System Time Set.[ OK ] Reached target System Time Synchronized.[ OK ] Started Daily apt download activities.[ OK ] Started Daily rotation of log files.[ OK ] Reached target Timers.[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.[ OK ] Listening on D-Bus System Message Bus Socket.[ OK ] Listening on dropbear.socket.[ OK ] Listening on RPCbind Server Activation Socket.[ OK ] Reached target Sockets.[ OK ] Reached target Basic System. Starting Save/Restore Sound Card State...[ OK ] Started Job spooling tools.[ OK ] Started Periodic Command Scheduler.[ OK ] Started D-Bus System Message Bus.[ OK ] Started Configuration for i.MX GPU (Former rc_gpu.S). Starting Packet Filtering Framework... Starting Network Time Service (one-shot ntpdate mode)... Starting Telephony service... Starting RPC Bind Service... Starting System Logging Service... Starting Login Service...[ OK ] Started Save/Restore Sound Card State.[ OK ] Started Packet Filtering Framework.[ OK ] Started Network Time Service (one-shot ntpdate mode).[ OK ] Started RPC Bind Service.[ OK ] Started System Logging Service.[ OK ] Reached target Network (Pre).[ OK ] Reached target Sound Card. Starting Kernel Logging Service... Starting Network Service... Starting Rotate log files...[ OK ] Started Login Service.[ OK ] Started Telephony service.[ OK ] Started Rotate log files.[ OK ] Started Network Service. Starting Network Name Resolution...[ OK ] Started Kernel Logging Service.[ OK ] Started Network Name Resolution.[ OK ] Reached target Network.[ OK ] Reached target Host and Network Name Lookups. Starting Avahi mDNS/DNS-SD Stack...[ OK ] Started NFS status monitor for NFSv2/3 locking.. Starting Permit User Sessions...[ OK ] Started Target Communication Framework agent.[ OK ] Started Xinetd A Powerful Replacement For Inetd.[ OK ] Started Permit User Sessions.[ OK ] Started Getty on tty1.[ OK ] Started Serial Getty on ttymxc1.[ OK ] Reached target Login Prompts.[ OK ] Started Avahi mDNS/DNS-SD Stack.[ OK ] Reached target Multi-User System. Starting Update UTMP about System Runlevel Changes...[ OK ] Started Update UTMP about System Runlevel Changes. NXP i.MX Release Distro 5.4-zeus desk-mx8mm ttymxc1 desk- ${fdt_addr}mx8mm login:
</pre>
 
----
[[Category:ORCA]] [[Category:MITO 8M Mini]]
8,256
edits