From <code>imx8mp-mito8mplus-cb1001.dts</code>:
<preclass="workstation-terminal">......
&usb3_phy1 {
fsl,phy-tx-preemp-amp-tune = <2>;
status = "okay";
};
......
</pre>
From <code>imx8mm-mito8mmini.dts</code>:
<preclass="workstation-terminal">
...
...
</pre>
=== Additional information in host mode ===
=== Additional information in host mode ===
If the root file system configuration does not automatically mount the partition, it is possible to mount the device using the following command:
-rwxr-xr-x 1 root root 531 Nov 17 15:27 settings.txt
</pre>
<section end=Body/>