ONDA SOM/ONDA Evaluation Kit/Interfaces and Connectors/JTAG

History
Issue Date	Notes
2026/03/27	First documentation release

JTAG

JTAG port is available as two different mechanical connectors:

• 2.00mm-pitch 7x2 header (Xilinx standard)
• 2.54mm-pitch 10x2 header ARM standard
• This port is connected to Zynq's native JTAG signals. Please note that Zynq's internal JTAG chain supports differents configurations, depending on bootstrap signals. In case split mode is selected, CPU JTAG can be routed separately via PL. For more details please refer to Zynq Technical Reference Manual.
• JTAG on ONDA Evaluation Kit is also connected to the FMC connector. For more details on how to connect JTAG on a custom FMC card please refer to ANSI/VITA FPGA Mezzanine Card (FMC) Standard.

JTAG XILINX

J13 is a 14-pin 7x2x2 pitch vertical header. The following table reports the pinout of the connector:

Pin#	Pin name	Function	Notes
1, 3, 5, 7, 9, 11, 13	DGND	-	-
2	3.3V	-	-
4	JTAG_TMS	-	-
6	JTAG_TCK	-	-
8	JTAG_TDO	-	-
10	JTAG_TDI	-	-
12	N.C.	-	-
14	JTAG_TRSTn	-	-

JTAG ARM

J18 is a 20-pin 10x2x2.54 pitch vertical header. The following table reports the pinout of the connector:

Pin#	Pin name	Function	Notes
1	3.3V	-	-
2	3.3V	-	-
3, 11, 17, 19	N.C.	-	-
4, 6 ,8 ,10 ,12, 14, 16, 18, 20	DGND	-	-
5	JTAG_TDI	-	-
7	JTAG_TMS	-	-
9	JTAG_TCK	-	-
13	JTAG_TDO	-	-
15	JTAG_TRSTn	-	-

ONDA Evaluation Kit JTAG connectors