BORA SOM/BORA Hardware/Power and Reset/JTAG
< BORA SOM | BORA Hardware
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
| History | |||
|---|---|---|---|
| Issue Date | Notes | ||
| 2021/08/28 | New documentation layout | ||
Contents
On board JTAG connector[edit | edit source]
The Zynq-7000 family of AP SoC devices provides debug access via a standard JTAG (IEEE 1149.1) debug interface. This JTAG port grants access to the device chain composed of both the CPU core and the FPGA part.
JTAG signals are connected to the pinout connector (J2) on BORA.
| Pin# | Pin name | Function | Notes |
|---|---|---|---|
| J2.86 | JTAG_TCK | - | - |
| J2.84 | JTAG_TMS | - | - |
| J2.80 | JTAG_TDO | - | - |
| J2.82 | JTAG_TDI | - | - |
| J2.90 | FPGA_INIT_B | - | For further details, please refer to PL initialization signals |
| J2.92 | FPGA_PROGRAM_B | - | For further details, please refer to PL initialization signals
(10 kΩ pull-up resistor is already mounted on BORA module) |
| J2.94 | FPGA_DONE | - | For further details, please refer to PL initialization signals |
