{{WarningMessage|text=This application note was validated against specific versions of the kit only. It may not work with other versions. Supported versions are listed in the ''History'' section.}}
==History==
The usual [[FAQs_(Axel)#Q:_How_can_I_configure_the_Axel_system_to_boot_from_network.3F|<code>net_nfs</code> variable]] has been used to boot the system. The following dump shows the complete log of bootstrap messages:
It is worth to remember that native Ethernet interface is still available for U-Boot operations. As such, Linux kernel image and device tree blob can be retrieved by target over native Ethernet connection (that's why this cable has not been disconnected). Once Linux kernel gets the control of the processor, it initializes the USB/Ethernet port - that is mapped as <code>eth0</code> - that is the only one available in the Linux realm.