767
edits
Changes
no edit summary
{{InfoBoxBottom}}
If you have the bootable SD/MMC provided with the development kit and it contains the boot.scr script file, the following command is automatically executed by U-Boot: <pre class="board-terminal">echo trying to boot from NELK MMC; mmc rescan 0; fatload mmc 0 80900000 boot.scr; source 80900000; run net_nfs</pre> If the boot.scr script file is not available, you can manually boot the system from SD using the following commands: <pre class="board-terminal">mmc rescan 0fatload mmc 0 81000000 uImagesetenv mmcargs 'setenv bootargs root=Introduction/dev/mmcblk0p2 rw'run mmcargs addip addcons addmembootm 81000000</pre> If a Linux kernel image has been preliminary programmed on the SPI NOR flash, you can run the following command: <pre class="board-terminal">run spi_mmc</pre> To start Linux (from on-board SPI NOR flash) and mount the development root file system (over SD/MMC). ==== Booting from network ==== If you have installed the [[:Category:DVDK|'''DAVE Embedded Systems''' Virtual Development Kit]], you can start the Virtual Machine and start Linux loading the kernel through tftp and mounting the NFS root file system with the following command: <pre class="board-terminal">run net_nfs</pre> Please note that you need to modify some u-boot environment variables before running the net_nfs configuration. For further information, please refer to [[Booting_Linux_Kernel#Configuration_net_nfs | Configuration net_nfs]]. ===Hardware information=== ====Bootstrap settings==== Please refer to [[Bootstrap settings (NaonEVB-Mid is )]] ====JTAG interfaces==== Please refer to [[JTAG interfaces (NaonEVB-Mid)]]. ====Video interfaces====NaonEVB-Mid provides a carrier board designed rich set of video input/output interfaces. Please refer to evaluate the functionalities of [[Naon SOMVideo input/output interfaces (NaonEVB-Mid)|this page]]for more details.==Schematics=={{ImportantMessage|text=Please note that Orcad CIS is required to get all the information about BOM variants included in .dsn files. PDF files show the view of the default BOM variant used to manufacture the board. Also it can be viewed Components that are not populated are denoted as reference design "Do Not Stuff".}}* Orcad: http://www.dave.eu/system/files/area-riservata/naonevb-mid-1.0.6.zip* PDF: http://www.dave.eu/system/files/area-riservata/naonevb-mid-NADP_S-NADP0000C0R_1.0.6.pdf == PinMux == * File .dat for the [http://www.ti.com/tool/pinmuxtool PinMux utility] containing the cpu pin configuration for multimedia applications built upon Naon modulethe NaonEVB-Mid carrier board : http://www.dave.eu/system/files/area-riservata/naon-evbs-pinmux.zip ==BOM==* http://www.dave.eu/system/files/area-riservata/naonevb-mid-BOM_S.NADP0000C0R.1.0.6.zip==Layout==* http://www.dave.eu/system/files/area-riservata/naonevb-mid-CS064311A_component_view.pdf==Mechanical==* DXF: http://www.dave.eu/system/files/area-riservata/naonevb-mid-CS064311A.zip* IDF (3D): http://www.dave.eu/system/files/area-riservata/naonevb-mid-CS064311-3D.zip