MayaEVB-Lite
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
|
The information here provided are preliminary and subject to change. |
|
Introduction[edit | edit source]
MayaEVB-Lite is an adapter board designed to evaluate the functionalities of Maya system-on-module. Because the similarities between Maya system-on-module and NAON system-on-module (1), it has been designed to allow the mating of Maya on carrier boards designed for Naon originally. Thus MayaEVB-Lite shall always be used in combination with such a kind of carrier board (for example see NaonEVB-Lite and NaonEVB-Mid).
(1) Maya can be considered as a design derived from NAON system-on-module. Thus they have a lot of common in terms of functional and electrical characteristics. Even if they do not have the same form factor, many interface signals are the same.
Schematics[edit | edit source]
 Please note that Orcad CIS is required to get all the information about BOM variants included in .dsn files. PDF files show the view of the default BOM variant used to manufacture the board. Components that are not populated are denoted as "Do Not Stuff". |
- Orcad: http://www.dave.eu/system/files/area-riservata/mayaevb-lite-0.9.0.zip
- PDF: http://www.dave.eu/system/files/area-riservata/mayaevb-lite_S.EVBI0000C0R.0.9.0.pdf
BOM[edit | edit source]
Layout[edit | edit source]
Mechanical[edit | edit source]
- DXF: http://www.dave.eu/system/files/area-riservata/mayaevb-lite-CS184012.zip
- IDF (3D): http://www.dave.eu/system/files/area-riservata/mayaevb-lite-CS184012-3D.zip
Quick start[edit | edit source]
U-Boot 2010.06-00011-gd371eb4 (Apr 22 2013 - 17:24:46) [nelk-4.0.0-Maya-min] TI8148-GP rev 3.0 ARM clk: 600MHz DDR clk: 400MHz L3 clk: 200MHz DSS clk: 200MHz IVA clk: 266MHz ISS clk: 400MHz DSP clk: 500MHz DRAM: 512 MiB Using default environment Hit any key to stop autoboot: 0 SF: Detected MX25L25635F with page size 256, total 33554432 bytes 32768 KiB MX25L25635F at 0:0 is now current device ## Starting application at 0x81000000 ... U-Boot 2010.06-00011-gd371eb4 (Apr 22 2013 - 17:25:25) [nelk-4.0.0-Maya] TI8148-GP rev 3.0 ARM clk: 600MHz DDR clk: 400MHz L3 clk: 200MHz DSS clk: 200MHz IVA clk: 266MHz ISS clk: 400MHz DSP clk: 500MHz I2C: ready DRAM: 512 MiB NAND: HW ECC BCH8 Selected 1024 MiB MMC: OMAP SD/MMC: 0 SF: Detected MX25L25635F with page size 256, total 33554432 bytes MUX: configuring for maya_naon_evb_lite Net: Detected MACID:00:50:C2:1E:AF:E4 cpsw Hit any key to stop autoboot: 0 MAYA#
