Difference between revisions of "Integration guide (Naon)"
DevWikiAdmin (talk | contribs) (→EMAC1) |
DevWikiAdmin (talk | contribs) (software section stub) |
||
| Line 21: | Line 21: | ||
* [http://www.dave.eu/download/restricted/naon/common/hw/naon-boot.pdf PDF] | * [http://www.dave.eu/download/restricted/naon/common/hw/naon-boot.pdf PDF] | ||
==Software== | ==Software== | ||
| + | |||
| + | Software section of the integration guide is about software device support for Naon hardware peripherals on different OSes. | ||
| + | |||
| + | For additional information regarding lowlevel support and configuration take a look at [http://processors.wiki.ti.com/index.php/TI81xx_PSP_Porting_Guide PSP Porting guide on TI wiki] | ||
| + | |||
| + | === UART === | ||
| + | |||
| + | ==== Additional UART on Linux ==== | ||
| + | |||
| + | === SPI === | ||
| + | |||
| + | ==== Additional SPI bus on Linux ==== | ||
| + | |||
| + | ==== Additional SPI peripheral on Linux ==== | ||
| + | |||
| + | === I2C === | ||
| + | |||
| + | ==== Additional I2C peripheral on Linux ==== | ||
| + | |||
==Miscellaneous== | ==Miscellaneous== | ||
Revision as of 17:01, 7 May 2012
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Contents
Introduction[edit | edit source]
This page provides useful information and resources to system designers in order to integrate Naon module in his/her application very quickly.
Several topics are covered, ranging from hardware issues to manufacturing aspects.
Hardware[edit | edit source]
Several schematics are available in order to accelerate the design of carrier board hosting Naon SOM. Please note that, even if these schematics are derived from tested real-world applications, they are provided "as is" and they might be modified in order to adapt to your specific application.
Naon connectors pinout[edit | edit source]
The following links provide a portion of schematic where Naon mating connectors are instatiated:
Compatible part numbers are FX8C-140P-SVx by Hirose. x depends on selected stacking height. For more details please see Hirose FX8C Series.
Boot sequence[edit | edit source]
Naon default boot sequence can be changed by optional external circuitry. The following links provide a portion of schematic showing an example circuit that allows to change BTMODE bootstrap pins:
Software[edit | edit source]
Software section of the integration guide is about software device support for Naon hardware peripherals on different OSes.
For additional information regarding lowlevel support and configuration take a look at PSP Porting guide on TI wiki
