Integration guide (Maya)
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
|
The information here provided are preliminary and subject to change. |
|
Contents
Introduction[edit | edit source]
This page provides useful information and resources to system designers in order to integrate Naon module in his/her application very quickly.
Several topics are covered, ranging from hardware issues to manufacturing aspects.
Hardware[edit | edit source]
Carrier board specific design guidelines[edit | edit source]
Please refer first to Carrier board design guidelines.
In this section hardware guidelines valid for MAYA are analized. The information provided here complete the Carrier board design guidelines for some specific interfaces.
Mechanical[edit | edit source]
TBD
Interfaces Guidelines[edit | edit source]
For interfaces not mentioned in this section, refer to the generic guidelines.
USB[edit | edit source]
Schematics[edit | edit source]
Maya supports 1 USB 2.0 OTG Full speed interface and 1 USB 2.0 Full speed device interface. See MAYA SOM page for further details to how properly connect USB in respect of EMI issue solving.
PCB[edit | edit source]
Table listeb below integrated the general basic guidelines table
| Parameter for USB Differential Pairs | Min | Typ | Max |
| Max traces length | - | - | 17" |
