Integration guide (Dido)
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Contents
IntroductionEdit
This page provides useful information and resources to system designers in order to integrate Dido module in his/her application quickly. These information complement SoM-independent recommendations provided in the Carrier board design guidelines (SOM) page.
Several topics are covered, ranging from hardware issues to manufacturing aspects.
Edit
Please refer to Integration_guide_(Naon) for all the topics that are in common with the Naon SOM
Dido SOM specific topicsEdit
PCI ExpressEdit
PCBEdit
| Routed length for PCI Express Differential Pairs | Min | Typ | Max |
| Differential Impedance [Ohm] | - | 101 | - |
| Common Mode Impedance [Ohm] | - | 57 | - |
| Intra pair matching [mils]* | - | - | 5 |
| Max Length [in] | - | - | <5,5 |
| Stub | - | - | 0 |
| Vias on module TX | - | - | 3 |
| Vias on module RX | - | - | 6 |
- * See detailed trace lengths shown in the following table. These numbers are required to compute overall (SoM + carrier board) lengths.
| Dido pin name | Individual trace length [mils] |
| PCIE_TXP | 5234,14 |
| PCIE_TXN | 5234,14 |
| PCIE_RXP | 5174,11 |
| PCIE_RXN | 5169,96 |