Open main menu

DAVE Developer's Wiki β

Category:Diva

DIVA Texas Instruments AM335x CPU moduleEdit

Diva-am335x-overview.png


DIVA is a CPU module based on Texas Instruments "Sitara" AM335x Cortex-A8 application processor. It is built with SO-DIMM 204 pin form factor and it offers lots of graphics, processing, peripherals and industrial interface options, allowing customer to implement cost-effective designs. The Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS) adds further flexibility and enables additional peripherals interfaces and real-time protocols such us EtherCAT, PROFINET, EtherNet/IP, PROFIBUS, Ethernet Powerlink.

DIVA is a family of system-on-modules that belongs to DAVE Embedded Systems Lite Line product class.

Please visit DIVA Web Page for more product information.

Product StatusEdit

Traffic-light-YELLOW.png

The product is NOT RECOMMENDED for new designs. Please refer to this product: MITO 8M Mini SOM






DIVA SOM Longevity Program

Main FeaturesEdit

  • Texas Instruments "Sitara" AM335x Cortex-A8 processors family
  • Lite Line - ARM Cortex-A8 architecture @ up to 1000 MHz
  • NEON Multimedia Coprocessor and PowerVR® SGX Graphics Engine
  • Dual Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS)
  • Crypto Hardware Accelerator (AES, SHA, PKA, RNG)
  • SO-DIMM 204-pin form factor
  • Rich interfaces set including Dual CAN and Ethernet

DIVA technical specificationsEdit

CPU and Memories
Feature Specifications Options
CPU "Sitara" AM335x
ARMv7 architecture
Cortex A8 @ 300/600/800/1000
RAM 16-bit DDR3 @ 333 MHz
Up to 512 MB
Storage Flash NOR SPI
Flash NAND on local bus
I²C 32 kbit EEPROM
Peripherals
Feature Specifications Options
Graphic
Controller
Up to 24-Bits Data Output
Resolution Up to 2048x2048 (With
Maximum 126-MHz Pixel Clock)
TFT/RGB support
2D/3D Engines NEON Multimedia SIMD coprocessor
PowerVR SGX 530 3D Accelerator
Coprocessors Crypto Hardware Accelerator (AES, SHA,
PKA, RNG)
Up to 2x Programmable Realtime Units
(PRUs)
USB Up to 2x 2.0 OTG ports
UARTs Up to 6x UART ports
GPIO Up to x 118 lines, shared with other functions (interrupts available)
Input interfaces Integrated 4/5/8-wire resistive touch
screen controller
Networks Fast Ethernet with PHY
Additional MII/RMII/RGMII interface
CAN Dual CAN controller (version 2 part A, B)
SD/MMC Up to 3x MMC/SD/SDIO Serial interfaces
(up to 48 MHz)
Serial buses Up to 3x I²C channels
Up to 2x SPI channels
Audio Up to 2x McASP interface
Timers/ PWM Up to 4 programmable general purpose
RTC On board, external battery powered
Debug JTAG IEEE 1149.1 Test Access Port
ETM Port
ETB Port
Miscellaneous Up to 8x 12-bit ADC channels
Electrical, Mechanical and Environmental Specifications
Feature Specifications Options
Supply Voltage [3.6 - 5.5] V, voltage regulation on board
Active power
consumption
Please refer to Power consumption
section
Dimensions 67.5 mm x 38.3 mm
Weight <tbd>
MTBF <tbd>
Operating temperature 0..70 °C
-40..+85 °C
Connectors 204-pin SO-DIMM
Diva-bd.png

Hardware DocumentationEdit

Electrical Schematics Mechanical Documentation Carrier Board design Thermal & Power Management

Software DocumentationEdit

Bootloader Linux Yocto Ubuntu QT

DIVA Evaluation KitEdit

DIVA Evaluation Kit DIVELK is a development/test board designed to start working with the DIVA platform and experimenting with the implemented features. The carrier board hosts a DIVA CPU module and offers the following features:

Please refer to this page for more details.

Stay tuned with updates: DIVA RSS FeedEdit

Please subscribe to the Diva Pages Updates RSS Feed using your favourite RSS reader to be notified on wiki pages updates related to Diva.

Please refer to the Keeping updated on DAVE Embedded Systems Developer's wiki pages modifications section for further information on how to subscribe to the RSS feed.

Index of topics about DIVA SoMEdit

This category collects all the pages specific to DIVA modules and related carrier boards.