|
|
| (35 intermediate revisions by 4 users not shown) |
| Line 2: |
Line 2: |
| | {{Applies To BoraX}} | | {{Applies To BoraX}} |
| | {{InfoBoxBottom}} | | {{InfoBoxBottom}} |
| − | ==Introduction==
| |
| | | | |
| | + | {{ObsoleteWikiPage|link=DESK-XZ7-L}} |
| | | | |
| − | [[File:TBD.png|thumb|center|100px|BoraX SOM]]
| + | {{ImportantMessage|text='''For BXELK 1.0.1 or older, the boot process was based on the FSBL+second-stage bootloader (U-Boot) combination. From BXELK 2.0.0 on, the boot process is based on the first-stage bootloader (U-Boot SPL)+second-stage bootloader (U-Boot) combination.''' |
| | + | }} |
| | | | |
| | + | <section begin="Unboxing" /> |
| | + | ==Unboxing== |
| | | | |
| − | BoraX Embedded Linux Kit (BXELK for short) provides all the necessary components required to set up the developing environment to:
| + | [[File:BORA_Xpress.png|thumb|center|400px|BoraX SOM]] |
| − | * build the first-stage bootloader (FSBL)
| |
| − | * build the 2nd-stage bootloader (U-Boot)
| |
| − | * build and run Linux operating system on [[:Category:BoraX|BoraX system-on-module (SOM)]]
| |
| − | * build and debug applications that will be executed on top of Yocto-based Linux distribution running on the target.
| |
| − | The main kit components are:
| |
| − | * hardware platform, composed by [[:Category:BoraX|BoraX SOM]] and [[BoraXEVB]]
| |
| − | * development host released in the form of [[Managed_Virtual_Machine_(MVM)|Managed Virtual Machine]], tailored for [[Managed_Virtual_Machine_(MVM)#Yocto-based_Linux_distribution|Yocto-based distribution]]
| |
| − | * technical documentation (hardware manuals, mechanical drawings, reference schematics, application notes etc.)
| |
| | | | |
| − | The documents related to the software issues help the user to quickly start configuring the bootloader and the operating system, by hiding most of the complexity of the underlying hardware. '''Reading of the [[Managed_Virtual_Machine_(MVM)|Managed Virtual Machine documentation]] is strongly recommended''', as it plays a '''major role''' in the BXELK organization.
| |
| | | | |
| − | For more details about SBC Lynx hardware characteristics, please refer to the [[Hardware_Manual_(SBC_Lynx)|SBC Lynx Hardware Manual]]. An account for the reserved area of [http://www.dave.eu '''DAVE Embedded Systems''' website] is required to access the kit contents.
| + | BoraX Embedded Linux Kit (BXELK for short) provides all the necessary components required to set up the developing environment for: |
| | + | * building the first-stage bootloader: |
| | + | **FSBL for BXELK 1.0.1 or older |
| | + | **U-boot SPL for BXELK 2.0.0 or newer |
| | + | * building the second-stage bootloader (U-Boot) |
| | + | * building and running Linux operating system on [[BORA_Xpress_SOM|BORA Xpress SOM]] |
| | + | * building and debugging applications that will be executed on top of Yocto-based Linux distribution running on the target. |
| | | | |
| − | ==Kit content== | + | The main kit components are: |
| | + | * hardware platform, composed by [[BORA_Xpress_SOM|BORA Xpress SOM]] and [[BORA_Xpress_SOM/BORA_Xpress_Evaluation_Kit | BORA Xpress Evalutation kit]] |
| | + | * source code of target software |
| | + | * technical documentation (hardware manuals, mechanical drawings, reference schematics, application notes etc.) |
| | + | <section end="Unboxing" /> |
| | + | <section begin="Kit Content" /> |
| | | | |
| − | {| class="wikitable" | + | ==Kit contents== |
| | + | {| class="wikitable" style="margin: auto;" |
| | |- | | |- |
| | !Component | | !Component |
| Line 30: |
Line 36: |
| | !Notes | | !Notes |
| | |- | | |- |
| − | |style="text-align: center;" | [[File:TBD.png|60px]] | + | | style="text-align: center;" | [[File:BORA_Xpress.png|60px]] |
| − | |BoraX SOM (p/n DBXF4110D2R)<br> | + | |[[BORA Xpress SOM|BORA Xpress]] SOM (p/n DBXF4110S2R)<br> |
| | *SoC: Xilinx XC7Z030 (866Mhz, Speed "-3", Tj 0-100°C) | | *SoC: Xilinx XC7Z030 (866Mhz, Speed "-3", Tj 0-100°C) |
| | *SDRAM: 1 GB DDR3 | | *SDRAM: 1 GB DDR3 |
| | *NOR: bootable SPI flash 16 MB | | *NOR: bootable SPI flash 16 MB |
| | *NAND: 1GB (SLC) | | *NAND: 1GB (SLC) |
| | + | | |
| | + | * For more details, please refer to the[[BORA_Xpress_SOM/BORA_Xpress_Hardware | BORA Xpress Hardware Manual]] |
| | + | * By default, ARM cores frequency is set to 667 MHz and the [[Creating and building example Vivado project (BELK/BXELK)|example Vivado project]] is implemented for a "-1" device. This choice makes the software released with the kit compatible with possible variants based on different SoM models. In this regard, see also the [[#Order codes|order codes section]]. |
| | + | |- |
| | + | | style="text-align: center;" | [[File:BoraXEVB-01.png|60px]] |
| | + | |[[BORA_Xpress_SOM/BORA_Xpress_Evaluation_Kit | BORA Xpress]] Carrier board |
| | | | | | |
| | |- | | |- |
| − | |style="text-align: center;" | [[File:Alimentatore.jpg|40px]] | + | | style="text-align: center;" | [[File:Alimentatore.jpg|40px]] |
| | |AC/DC Single Output Wall Mount adapter<br> | | |AC/DC Single Output Wall Mount adapter<br> |
| | Output: +12V – 2.0 A | | Output: +12V – 2.0 A |
| | | | | | |
| | |- | | |- |
| − | |style="text-align: center;" | [[File:ProdSDC-MBLY-thumb.png|50px]] | + | | style="text-align: center;" | [[File:ProdSDC-MBLY-thumb.png|50px]] |
| − | |MicroSDHC card with SD adapter and USB adapter | + | |microSDHC card with SD adapter and USB adapter |
| | | | | | |
| | |- | | |- |
| | |} | | |} |
| | + | |
| | + | ===Order codes=== |
| | + | {| class="wikitable" style="margin: auto;" |
| | + | |+ |
| | + | !Order code |
| | + | !Description |
| | + | |- |
| | + | |BXELK-H-S |
| | + | |This code refers to the default configuration detailed above |
| | + | |- |
| | + | |BXELK-H-S-D |
| | + | |This variant is like BELK-L-S, except the SOM, which is DBXD4110S2R. |
| | + | |} |
| | + | <section end="Kit Content" /> |
| | | | |
| | ==Logical structure of BXELK== | | ==Logical structure of BXELK== |
| Line 56: |
Line 82: |
| | | | |
| | ==Quick start guide== | | ==Quick start guide== |
| − | This chapter describes how to quickly start working with the BXELK kit. The following paragraphs will guide you through the setup and installation procedures.
| + | Please refer to [[BELK/BXELK_Quick_Start_Guide|this page]]. |
| − | ===Kit registration===
| |
| − | {{ImportantMessage|text='''Customers are strongly recommended to register their kits'''. Registration grants access to reserved material such as source code and additional documentation.}}
| |
| − | | |
| − | Please register your development kit by sending an email to [mailto:support-lynx@dave.eu support-lynx@dave.eu], providing the kit P/N and CODE. | |
| − | | |
| − | ===Target setup and first boot===
| |
| − | This section describes how to quick start SBC Lynx board delivered along with BXELK kit:
| |
| − | *connect a TTL/USB serial cable to J42 connector; J42 pinout is:
| |
| − | ** 1: TX data
| |
| − | ** 2: RX data
| |
| − | ** 3: 3.3V
| |
| − | ** 4: GND
| |
| − | *on host side start your favorite terminal that will be used to interact with the target's serial console; communication parameters are 115200-8-N-1
| |
| − | *optionally connect the system to Ethernet LAN by plugging cable into connector J16
| |
| − | *connect 12V power supply to J35 connector; J35 pinout is:
| |
| − | **1: GND
| |
| − | **2: VIN
| |
| − | *insert microSD card in the slot J43.
| |
| − | | |
| − | | |
| − | [[File:SBCLynx-BXELK.png|thumb|center|600px|Target setup for first boot]]
| |
| − | | |
| − | | |
| − | Once power has been applied to the target, U-Boot bootloader will be fetched from the SPI NOR flash and executed. Boot messages will be printed out to the serial console. Redundant U-Boot environment is stored in the NOR flash as well, as depicted in the following image.
| |
| − | | |
| − | | |
| − | [[File:Xub-nor.png|thumb|center|350px|NOR flash default partitioning]]
| |
| − | | |
| − | | |
| − | By default, U-Boot is configured to retrieve Linux kernel image stored in the microSD card [1]. In turn, Linux kernel shall mount root file system from the <code>mmcblk0p2</code> partition of the [[#BXELK microSD Layout|microSD card itself]]. At the end of boot process, Linux shell shall be available on the serial console.
| |
| − | | |
| − | The following dump shows the typical messages printed out to the console during bootstrap process.
| |
| − | <pre class="mw-collapsible mw-collapsed">
| |
| − | U-Boot 2015.04 (Mar 31 2016 - 23:22:16)-xuelk-0.9.0
| |
| − | | |
| − | CPU: Freescale i.MX6UL rev1.0 at 396 MHz
| |
| − | CPU: Temperature 30 C
| |
| − | Reset cause: POR
| |
| − | Board: MX6UL LYNX
| |
| − | I2C: ready
| |
| − | DRAM: 512 MiB
| |
| − | PMIC: PFUZE300 DEV_ID=0x30 REV_ID=0x11
| |
| − | NAND: 1024 MiB
| |
| − | MMC: FSL_SDHC: 0
| |
| − | SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
| |
| − | In: serial
| |
| − | Out: serial
| |
| − | Err: serial
| |
| − | SOM ConfigID#: 00000008
| |
| − | SOM UniqueID#: e317402a:1735b1d4
| |
| − | CB ConfigID#: 0000000e
| |
| − | CB UniqueID#: a0000011:0dcf672d
| |
| − | Board: MX6UL-Lynx
| |
| − | Net: FEC0
| |
| − | Normal Boot
| |
| − | Hit any key to stop autoboot: 0
| |
| − | starting USB...
| |
| − | USB0: Port not available.
| |
| − | USB1: USB EHCI 1.00
| |
| − | scanning bus 1 for devices... 1 USB Device(s) found
| |
| − | scanning usb for storage devices... 0 Storage Device(s) found
| |
| − | scanning usb for ethernet devices... 0 Ethernet Device(s) found
| |
| − | | |
| − | USB device 0: unknown device
| |
| − | ** Bad device usb 0 **
| |
| − | switch to partitions #0, OK
| |
| − | mmc0 is current device
| |
| − | reading boot.scr
| |
| − | 228 bytes read in 12 ms (18.6 KiB/s)
| |
| − | Running bootscript from mmc ...
| |
| − | ## Executing script at 80800000
| |
| − | bootscript generated with command "mkimage -T script -C none -n SBC-Lynx -d bootscript.txt boot.scr"
| |
| − | Booting SBC-Lynx via mmcboot
| |
| − | reading uImage
| |
| − | 6033832 bytes read in 277 ms (20.8 MiB/s)
| |
| − | reading imx6ul-lynx.dtb
| |
| − | 29394 bytes read in 22 ms (1.3 MiB/s)
| |
| − | FDT: override 'som_configid' with '00000008'
| |
| − | FDT: property cb_configid 0000000e match
| |
| − | FDT: override 'som_uniqueid' with 'e317402a:1735b1d4'
| |
| − | FDT: override 'cb_uniqueid' with 'a0000011:0dcf672d'
| |
| − | ## Booting kernel from Legacy Image at 80800000 ...
| |
| − | Image Name: Linux-3.14.52-xuelk-0.9.0
| |
| − | Image Type: ARM Linux Kernel Image (uncompressed)
| |
| − | Data Size: 6033768 Bytes = 5.8 MiB
| |
| − | Load Address: 80008000
| |
| − | Entry Point: 80008000
| |
| − | Verifying Checksum ... OK
| |
| − | ## Flattened Device Tree blob at 83000000
| |
| − | Booting using the fdt blob at 0x83000000
| |
| − | EHCI failed to shut down host controller.
| |
| − | Loading Kernel Image ... OK
| |
| − | Using Device Tree in place at 83000000, end 8300a2d1
| |
| − | switch to ldo_bypass mode!
| |
| − | | |
| − | Starting kernel ...
| |
| − | | |
| − | Booting Linux on physical CPU 0x0
| |
| − | Linux version 3.14.52-xuelk-0.9.0 (amon@linuxserver2) (gcc version 4.9.2 (GCC) ) #2 SMP PREEMPT Thu Mar 31 22:53:29 CEST 2016
| |
| − | CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
| |
| − | CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
| |
| − | Machine model: Freescale i.MX6 UltraLite LYNX Board
| |
| − | cma: CMA: reserved 320 MiB at 8c000000
| |
| − | Memory policy: Data cache writealloc
| |
| − | PERCPU: Embedded 8 pages/cpu @8bb41000 s8320 r8192 d16256 u32768
| |
| − | Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
| |
| − | Kernel command line: root=/dev/mmcblk1p2 rootwait rw console=ttymxc0,115200 vmalloc=400M mtdparts=gpmi-nand:8M(nand-uboot),1M(nand-env1),1M(nand-env2),1M(nand-fdt),1M(nand-spare),8M(nand-kernel),4M(nand-splash),-(nand-ubi);spi0.0:1M(spi-uboot),256k(spi-env1),256k(spi-env2),512k(spi-dtb),6M(spi-kernel),4M(spi-splash),-(spi-free)
| |
| − | PID hash table entries: 2048 (order: 1, 8192 bytes)
| |
| − | Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
| |
| − | Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
| |
| − | Memory: 179908K/524288K available (7511K kernel code, 461K rwdata, 2596K rodata, 392K init, 433K bss, 344380K reserved, 0K highmem)
| |
| − | Virtual kernel memory layout:
| |
| − | vector : 0xffff0000 - 0xffff1000 ( 4 kB)
| |
| − | fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
| |
| − | vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
| |
| − | lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
| |
| − | pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
| |
| − | modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
| |
| − | .text : 0x80008000 - 0x809e7134 (10109 kB)
| |
| − | .init : 0x809e8000 - 0x80a4a080 ( 393 kB)
| |
| − | .data : 0x80a4c000 - 0x80abf400 ( 461 kB)
| |
| − | .bss : 0x80abf40c - 0x80b2ba5c ( 434 kB)
| |
| − | SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
| |
| − | Preemptible hierarchical RCU implementation.
| |
| − | RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
| |
| − | RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
| |
| − | NR_IRQS:16 nr_irqs:16 16
| |
| − | Switching to timer-based delay loop
| |
| − | sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns
| |
| − | clocksource_of_init: no matching clocksources found
| |
| − | Console: colour dummy device 80x30
| |
| − | Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
| |
| − | pid_max: default: 32768 minimum: 301
| |
| − | Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
| |
| − | Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
| |
| − | CPU: Testing write buffer coherency: ok
| |
| − | /cpus/cpu@0 missing clock-frequency property
| |
| − | CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
| |
| − | Setting up static identity map for 0x807267c0 - 0x80726818
| |
| − | Brought up 1 CPUs
| |
| − | SMP: Total of 1 processors activated (6.00 BogoMIPS).
| |
| − | CPU: All CPU(s) started in SVC mode.
| |
| − | devtmpfs: initialized
| |
| − | VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
| |
| − | pinctrl core: initialized pinctrl subsystem
| |
| − | regulator-dummy: no parameters
| |
| − | NET: Registered protocol family 16
| |
| − | DMA: preallocated 256 KiB pool for atomic coherent allocations
| |
| − | cpuidle: using governor ladder
| |
| − | cpuidle: using governor menu
| |
| − | Use WDOG1 as reset source
| |
| − | syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
| |
| − | vdd3p0: 2625 <--> 3400 mV at 3000 mV
| |
| − | cpu: 725 <--> 1450 mV
| |
| − | vddsoc: 725 <--> 1450 mV
| |
| − | syscon 20e4000.iomuxc-gpr: regmap [mem 0x020e4000-0x020e7fff] registered
| |
| − | syscon 21ac000.romcp: regmap [mem 0x021ac000-0x021affff] registered
| |
| − | syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
| |
| − | hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
| |
| − | hw-breakpoint: maximum watchpoint size is 8 bytes.
| |
| − | imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
| |
| − | 20dc000.gpc supply pu not found, using dummy regulator
| |
| − | bio: create slab <bio-0> at 0
| |
| − | mxs-dma 1804000.dma-apbh: initialized
| |
| − | vref-3v3: 3300 mV
| |
| − | usb_otg1_vbus: 5000 mV
| |
| − | usb_otg2_vbus: 5000 mV
| |
| − | i2c-core: driver [max17135] using legacy suspend method
| |
| − | i2c-core: driver [max17135] using legacy resume method
| |
| − | SCSI subsystem initialized
| |
| − | usbcore: registered new interface driver usbfs
| |
| − | usbcore: registered new interface driver hub
| |
| − | usbcore: registered new device driver usb
| |
| − | i2c i2c-0: IMX I2C adapter registered
| |
| − | Linux video capture interface: v2.00
| |
| − | pps_core: LinuxPPS API ver. 1 registered
| |
| − | pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
| |
| − | PTP clock support registered
| |
| − | MIPI CSI2 driver module loaded
| |
| − | Advanced Linux Sound Architecture Driver Initialized.
| |
| − | Bluetooth: Core ver 2.18
| |
| − | NET: Registered protocol family 31
| |
| − | Bluetooth: HCI device and connection manager initialized
| |
| − | Bluetooth: HCI socket layer initialized
| |
| − | Bluetooth: L2CAP socket layer initialized
| |
| − | Bluetooth: SCO socket layer initialized
| |
| − | cfg80211: Calling CRDA to update world regulatory domain
| |
| − | Switched to clocksource mxc_timer1
| |
| − | NET: Registered protocol family 2
| |
| − | TCP established hash table entries: 4096 (order: 2, 16384 bytes)
| |
| − | TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
| |
| − | TCP: Hash tables configured (established 4096 bind 4096)
| |
| − | TCP: reno registered
| |
| − | UDP hash table entries: 256 (order: 1, 8192 bytes)
| |
| − | UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
| |
| − | NET: Registered protocol family 1
| |
| − | RPC: Registered named UNIX socket transport module.
| |
| − | RPC: Registered udp transport module.
| |
| − | RPC: Registered tcp transport module.
| |
| − | RPC: Registered tcp NFSv4.1 backchannel transport module.
| |
| − | imx rpmsg driver is registered.
| |
| − | Bus freq driver module loaded
| |
| − | futex hash table entries: 256 (order: 2, 16384 bytes)
| |
| − | VFS: Disk quotas dquot_6.5.2
| |
| − | Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
| |
| − | NFS: Registering the id_resolver key type
| |
| − | Key type id_resolver registered
| |
| − | Key type id_legacy registered
| |
| − | jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
| |
| − | fuse init (API version 7.22)
| |
| − | msgmni has been set to 991
| |
| − | io scheduler noop registered
| |
| − | io scheduler deadline registered
| |
| − | io scheduler cfq registered (default)
| |
| − | imx-weim 21b8000.weim: Driver registered.
| |
| − | MIPI DSI driver module loaded
| |
| − | MIPI DSI driver module loaded
| |
| − | imx-sdma 20ec000.sdma: no event needs to be remapped
| |
| − | imx-sdma 20ec000.sdma: loaded firmware 3.2
| |
| − | imx-sdma 20ec000.sdma: initialized
| |
| − | pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1
| |
| − | pfuze100-regulator 0-0008: FAB: 0, FIN: 0
| |
| − | pfuze100-regulator 0-0008: pfuze3000 found.
| |
| − | SW1A: 700 <--> 3300 mV at 3300 mV
| |
| − | SW1B: 700 <--> 1475 mV at 1175 mV
| |
| − | SW2: 2500 <--> 3300 mV at 3300 mV
| |
| − | SW3: 900 <--> 1650 mV at 1350 mV
| |
| − | SWBST: 5000 <--> 5150 mV at 5000 mV
| |
| − | VSNVS: 1000 <--> 3000 mV at 3000 mV
| |
| − | VREFDDR: 750 mV
| |
| − | VLDO1: 1800 <--> 3300 mV at 3300 mV
| |
| − | VLDO2: 800 <--> 1550 mV at 1500 mV
| |
| − | VCCSD: 2850 <--> 3300 mV at 3300 mV
| |
| − | V33: 2850 <--> 3300 mV at 3300 mV
| |
| − | VLDO3: 1800 <--> 3300 mV at 1800 mV
| |
| − | VLDO4: 1800 <--> 3300 mV at 1800 mV
| |
| − | Serial: IMX driver
| |
| − | 2018000.serial: ttymxc6 at MMIO 0x2018000 (irq = 71, base_baud = 5000000) is a IMX
| |
| − | 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 5000000) is a IMX
| |
| − | console [ttymxc0] enabled
| |
| − | 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60, base_baud = 5000000) is a IMX
| |
| − | serial: Freescale lpuart driver
| |
| − | imx sema4 driver is registered.
| |
| − | [drm] Initialized drm 1.1.0 20060810
| |
| − | [drm] Initialized vivante 1.0.0 20120216 on minor 0
| |
| − | brd: module loaded
| |
| − | loop: module loaded
| |
| − | nand: device found, Manufacturer ID: 0x01, Chip ID: 0xd3
| |
| − | nand: AMD/Spansion S34ML08G1
| |
| − | nand: 1024MiB, SLC, page size: 2048, OOB size: 64
| |
| − | gpmi-nand 1806000.gpmi-nand: mode:4 ,failed in set feature.
| |
| − | Scanning device for bad blocks
| |
| − | random: nonblocking pool is initialized
| |
| − | Bad eraseblock 5903 at 0x00002e1e0000
| |
| − | 8 cmdlinepart partitions found on MTD device gpmi-nand
| |
| − | Creating 8 MTD partitions on "gpmi-nand":
| |
| − | 0x000000000000-0x000000800000 : "nand-uboot"
| |
| − | 0x000000800000-0x000000900000 : "nand-env1"
| |
| − | 0x000000900000-0x000000a00000 : "nand-env2"
| |
| − | 0x000000a00000-0x000000b00000 : "nand-fdt"
| |
| − | 0x000000b00000-0x000000c00000 : "nand-spare"
| |
| − | 0x000000c00000-0x000001400000 : "nand-kernel"
| |
| − | 0x000001400000-0x000001800000 : "nand-splash"
| |
| − | 0x000001800000-0x000040000000 : "nand-ubi"
| |
| − | gpmi-nand 1806000.gpmi-nand: driver registered.
| |
| − | m25p80 spi0.0: s25fl256s1 (32768 Kbytes)
| |
| − | 7 cmdlinepart partitions found on MTD device spi0.0
| |
| − | Creating 7 MTD partitions on "spi0.0":
| |
| − | 0x000000000000-0x000000100000 : "spi-uboot"
| |
| − | 0x000000100000-0x000000140000 : "spi-env1"
| |
| − | 0x000000140000-0x000000180000 : "spi-env2"
| |
| − | 0x000000180000-0x000000200000 : "spi-dtb"
| |
| − | 0x000000200000-0x000000800000 : "spi-kernel"
| |
| − | 0x000000800000-0x000000c00000 : "spi-splash"
| |
| − | 0x000000c00000-0x000002000000 : "spi-free"
| |
| − | spi_imx 2008000.ecspi: probed
| |
| − | CAN device driver interface
| |
| − | 2188000.ethernet supply phy not found, using dummy regulator
| |
| − | pps pps0: new PPS source ptp0
| |
| − | libphy: fec_enet_mii_bus: probed
| |
| − | fec 2188000.ethernet eth0: registered PHC device 0
| |
| − | ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
| |
| − | ehci-mxc: Freescale On-Chip EHCI Host driver
| |
| − | usbcore: registered new interface driver usb-storage
| |
| − | usbcore: registered new interface driver usb_ehset_test
| |
| − | 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
| |
| − | ci_hdrc ci_hdrc.1: EHCI Host Controller
| |
| − | ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
| |
| − | ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
| |
| − | hub 1-0:1.0: USB hub found
| |
| − | hub 1-0:1.0: 1 port detected
| |
| − | mousedev: PS/2 mouse device common for all mice
| |
| − | snvs_pwrkey 20cc000.snvs-pwrkey: can't get snvs clock
| |
| − | input: 20cc000.snvs-pwrkey as /devices/soc0/soc.0/2000000.aips-bus/20cc000.snvs-pwrkey/input/input0
| |
| − | snvs_pwrkey 20cc000.snvs-pwrkey: i.MX snvs powerkey probed
| |
| − | i2c-core: driver [isl29023] using legacy suspend method
| |
| − | i2c-core: driver [isl29023] using legacy resume method
| |
| − | snvs_rtc 20cc034.snvs-rtc-lp: can't get snvs-rtc clock
| |
| − | snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0
| |
| − | i2c /dev entries driver
| |
| − | IR NEC protocol handler initialized
| |
| − | IR RC5(x) protocol handler initialized
| |
| − | IR RC6 protocol handler initialized
| |
| − | IR JVC protocol handler initialized
| |
| − | IR Sony protocol handler initialized
| |
| − | IR RC5 (streamzap) protocol handler initialized
| |
| − | IR SANYO protocol handler initialized
| |
| − | IR MCE Keyboard/mouse protocol handler initialized
| |
| − | i2c-core: driver [mag3110] using legacy suspend method
| |
| − | i2c-core: driver [mag3110] using legacy resume method
| |
| − | imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
| |
| − | Bluetooth: HCI UART driver ver 2.2
| |
| − | Bluetooth: HCI H4 protocol initialized
| |
| − | Bluetooth: HCI BCSP protocol initialized
| |
| − | Bluetooth: HCIATH3K protocol initialized
| |
| − | usbcore: registered new interface driver bcm203x
| |
| − | usbcore: registered new interface driver btusb
| |
| − | usbcore: registered new interface driver ath3k
| |
| − | sdhci: Secure Digital Host Controller Interface driver
| |
| − | sdhci: Copyright(c) Pierre Ossman
| |
| − | sdhci-pltfm: SDHCI platform and OF driver helper
| |
| − | mmc1: no vqmmc regulator found
| |
| − | mmc1: no vmmc regulator found
| |
| − | mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
| |
| − | caam 2140000.caam: Instantiated RNG4 SH0
| |
| − | mmc1: host does not support reading read-only switch. assuming write-enable.
| |
| − | caam 2140000.caam: Instantiated RNG4 SH1
| |
| − | caam 2140000.caam: device ID = 0x0a160300 (Era 8)
| |
| − | caam 2140000.caam: job rings = 3, qi = 0
| |
| − | mmc1: new high speed SDHC card at address 1234
| |
| − | mmcblk1: mmc1:1234 SA16G 14.4 GiB
| |
| − | mmcblk1: p1 p2
| |
| − | caam algorithms registered in /proc/crypto
| |
| − | caam_jr 2141000.jr0: registering rng-caam
| |
| − | platform caam_sm: blkkey_ex: 8 keystore units available
| |
| − | platform caam_sm: 64-bit clear key:
| |
| − | platform caam_sm: [0000] 00 01 02 03 04 0f 06 07
| |
| − | platform caam_sm: 64-bit black key:
| |
| − | platform caam_sm: [0000] 5f 69 65 43 d8 01 d4 35
| |
| − | platform caam_sm: [0008] 72 51 75 22 a5 33 93 cf
| |
| − | platform caam_sm: 128-bit clear key:
| |
| − | platform caam_sm: [0000] 00 01 02 03 04 0f 06 07
| |
| − | platform caam_sm: [0008] 08 09 0a 0b 0c 0d 0e 0f
| |
| − | platform caam_sm: 128-bit black key:
| |
| − | platform caam_sm: [0000] 7e 83 f5 8e ed bd bf 4e
| |
| − | platform caam_sm: [0008] 6f 98 a2 68 c3 30 a3 81
| |
| − | platform caam_sm: 192-bit clear key:
| |
| − | platform caam_sm: [0000] 00 01 02 03 04 0f 06 07
| |
| − | platform caam_sm: [0008] 08 09 0a 0b 0c 0d 0e 0f
| |
| − | platform caam_sm: [0016] 10 11 12 13 14 15 16 17
| |
| − | platform caam_sm: 192-bit black key:
| |
| − | platform caam_sm: [0000] 73 ba ab 08 93 75 f2 e3
| |
| − | platform caam_sm: [0008] 66 73 d2 17 0c a7 f3 08
| |
| − | platform caam_sm: [0016] 5b ee ee 28 37 82 c6 d6
| |
| − | platform caam_sm: [0024] 75 3f 5e fc 50 be 9f c9
| |
| − | platform caam_sm: 256-bit clear key:
| |
| − | platform caam_sm: [0000] 00 01 02 03 04 0f 06 07
| |
| − | platform caam_sm: [0008] 08 09 0a 0b 0c 0d 0e 0f
| |
| − | platform caam_sm: [0016] 10 11 12 13 14 15 16 17
| |
| − | platform caam_sm: [0024] 18 19 1a 1b 1c 1d 1e 1f
| |
| − | platform caam_sm: 256-bit black key:
| |
| − | platform caam_sm: [0000] da 35 27 8d 68 e2 e8 44
| |
| − | platform caam_sm: [0008] 58 3a 7d 32 ea 54 dc 77
| |
| − | platform caam_sm: [0016] 48 a1 28 bc a2 71 ad 8d
| |
| − | platform caam_sm: [0024] 6f 9a 59 ba 5c 35 63 56
| |
| − | platform caam_sm: 64-bit unwritten blob:
| |
| − | platform caam_sm: [0000] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0008] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0016] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0024] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0032] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0040] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0048] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0056] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0064] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0072] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0080] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0088] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: 128-bit unwritten blob:
| |
| − | platform caam_sm: [0000] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0008] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0016] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0024] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0032] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0040] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0048] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0056] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0064] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0072] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0080] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0088] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: 196-bit unwritten blob:
| |
| − | platform caam_sm: [0000] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0008] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0016] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0024] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0032] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0040] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0048] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0056] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0064] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0072] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0080] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0088] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: 256-bit unwritten blob:
| |
| − | platform caam_sm: [0000] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0008] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0016] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0024] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0032] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0040] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0048] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0056] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0064] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0072] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0080] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0088] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: 64-bit black key in blob:
| |
| − | platform caam_sm: [0000] 76 1a d3 a8 86 30 b4 a9
| |
| − | platform caam_sm: [0008] 03 2d 01 ef dd 15 89 7c
| |
| − | platform caam_sm: [0016] d3 b3 14 03 ff 1d 6d ef
| |
| − | platform caam_sm: [0024] b1 74 a7 d4 2e 7f 3a 65
| |
| − | platform caam_sm: [0032] d5 b2 b6 56 e8 b0 82 cf
| |
| − | platform caam_sm: [0040] d4 59 c7 be 73 47 b9 db
| |
| − | platform caam_sm: [0048] 6f 44 84 81 a1 04 13 d9
| |
| − | platform caam_sm: [0056] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0064] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0072] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0080] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0088] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: 128-bit black key in blob:
| |
| − | platform caam_sm: [0000] 50 a0 64 22 80 35 36 4e
| |
| − | platform caam_sm: [0008] 1c 6a 31 07 87 4c db f2
| |
| − | platform caam_sm: [0016] 13 6a 4c 47 08 40 e3 87
| |
| − | platform caam_sm: [0024] 98 52 fe 72 25 9f 91 dd
| |
| − | platform caam_sm: [0032] a6 e0 31 e1 72 50 ea 02
| |
| − | platform caam_sm: [0040] 05 a9 62 d8 7e dd 91 48
| |
| − | platform caam_sm: [0048] 58 94 2d bd 1c 84 9b 2e
| |
| − | platform caam_sm: [0056] 68 b7 16 05 6b 6c 4a 8a
| |
| − | platform caam_sm: [0064] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0072] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0080] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0088] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: 192-bit black key in blob:
| |
| − | platform caam_sm: [0000] a5 d5 43 dc 3e a5 72 dc
| |
| − | platform caam_sm: [0008] 6a 8c 07 1a 3c 29 29 0d
| |
| − | platform caam_sm: [0016] af d9 84 13 68 5f 65 15
| |
| − | platform caam_sm: [0024] 67 ae e9 5b 16 26 ab 2c
| |
| − | platform caam_sm: [0032] f3 ee 21 2f 51 ea f4 17
| |
| − | platform caam_sm: [0040] 27 42 81 f3 ea a2 73 fb
| |
| − | platform caam_sm: [0048] 8e b9 45 dd c8 04 9b 67
| |
| − | platform caam_sm: [0056] 6a 5f 9f c2 08 dc c7 73
| |
| − | platform caam_sm: [0064] 0b a5 46 35 bb 65 ee d1
| |
| − | platform caam_sm: [0072] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0080] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0088] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: 256-bit black key in blob:
| |
| − | platform caam_sm: [0000] d6 36 a9 1b df 26 a2 7f
| |
| − | platform caam_sm: [0008] 1c 8b 99 8b 33 34 5a 92
| |
| − | platform caam_sm: [0016] c4 00 dc dc 51 c4 2c f4
| |
| − | platform caam_sm: [0024] c3 11 f6 c7 a2 7c c2 ba
| |
| − | platform caam_sm: [0032] 7f 6f 4a d1 a7 7f 7b a0
| |
| − | platform caam_sm: [0040] 2f cb f4 4a b8 b8 4d 54
| |
| − | platform caam_sm: [0048] ae 10 ce 13 02 c5 09 da
| |
| − | platform caam_sm: [0056] ce 88 da 48 10 ee 20 e5
| |
| − | platform caam_sm: [0064] 28 bb 0f 76 e4 8a 8e ee
| |
| − | platform caam_sm: [0072] 46 e2 69 6f ca d3 e4 ba
| |
| − | platform caam_sm: [0080] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: [0088] 00 00 00 00 00 00 00 00
| |
| − | platform caam_sm: restored 64-bit black key:
| |
| − | platform caam_sm: [0000] 58 1c 8d b3 fa 93 6e 2c
| |
| − | platform caam_sm: [0008] f2 ae 66 67 b1 f4 e6 b9
| |
| − | platform caam_sm: restored 128-bit black key:
| |
| − | platform caam_sm: [0000] 7e 83 f5 8e ed bd bf 4e
| |
| − | platform caam_sm: [0008] 6f 98 a2 68 c3 30 a3 81
| |
| − | platform caam_sm: restored 192-bit black key:
| |
| − | platform caam_sm: [0000] 73 ba ab 08 93 75 f2 e3
| |
| − | platform caam_sm: [0008] 66 73 d2 17 0c a7 f3 08
| |
| − | platform caam_sm: [0016] ee 51 4c 4f 16 0a f2 9f
| |
| − | platform caam_sm: [0024] 9e c9 48 38 46 04 11 04
| |
| − | platform caam_sm: restored 256-bit black key:
| |
| − | platform caam_sm: [0000] da 35 27 8d 68 e2 e8 44
| |
| − | platform caam_sm: [0008] 58 3a 7d 32 ea 54 dc 77
| |
| − | platform caam_sm: [0016] 48 a1 28 bc a2 71 ad 8d
| |
| − | platform caam_sm: [0024] 6f 9a 59 ba 5c 35 63 56
| |
| − | snvs-secvio 20cc000.caam-snvs: can't get snvs clock
| |
| − | snvs-secvio 20cc000.caam-snvs: violation handlers armed - non-secure state
| |
| − | usbcore: registered new interface driver usbhid
| |
| − | usbhid: USB HID core driver
| |
| − | fsl-asrc 2034000.asrc: driver registered
| |
| − | NET: Registered protocol family 26
| |
| − | TCP: cubic registered
| |
| − | NET: Registered protocol family 10
| |
| − | sit: IPv6 over IPv4 tunneling driver
| |
| − | NET: Registered protocol family 17
| |
| − | can: controller area network core (rev 20120528 abi 9)
| |
| − | NET: Registered protocol family 29
| |
| − | can: raw protocol (rev 20120528)
| |
| − | can: broadcast manager protocol (rev 20120528 t)
| |
| − | can: netlink gateway (rev 20130117) max_hops=1
| |
| − | Bluetooth: RFCOMM TTY layer initialized
| |
| − | Bluetooth: RFCOMM socket layer initialized
| |
| − | Bluetooth: RFCOMM ver 1.11
| |
| − | Bluetooth: BNEP (Ethernet Emulation) ver 1.3
| |
| − | Bluetooth: BNEP filters: protocol multicast
| |
| − | Bluetooth: BNEP socket layer initialized
| |
| − | Bluetooth: HIDP (Human Interface Emulation) ver 1.2
| |
| − | Bluetooth: HIDP socket layer initialized
| |
| − | 8021q: 802.1Q VLAN Support v1.8
| |
| − | Key type dns_resolver registered
| |
| − | cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
| |
| − | SWBST: disabling
| |
| − | usb_otg1_vbus: disabling
| |
| − | regulator-dummy: disabling
| |
| − | imx mcc test is registered.
| |
| − | snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 2016-04-01 08:34:36 UTC (1459499676)
| |
| − | ALSA device list:
| |
| − | No soundcards found.
| |
| − | kjournald starting. Commit interval 5 seconds
| |
| − | EXT3-fs (mmcblk1p2): using internal journal
| |
| − | EXT3-fs (mmcblk1p2): recovery complete
| |
| − | EXT3-fs (mmcblk1p2): mounted filesystem with ordered data mode
| |
| − | VFS: Mounted root (ext3 filesystem) on device 179:2.
| |
| − | devtmpfs: mounted
| |
| − | Freeing unused kernel memory: 392K (809e8000 - 80a4a000)
| |
| − | INIT: version 2.88 booting
| |
| − | Error opening /dev/fb0: No such file or directory
| |
| − | Starting udev
| |
| − | udevd[157]: starting version 182
| |
| − | | |
| − | udevadm settle - timeout of 3 seconds reached, the event queue contains:
| |
| − | /sys/devices/soc0/soc.0/2100000.aips-bus/2188000.ethernet/net/eth0 (1225)
| |
| − | /sys/devices/soc0/soc.0/2100000.aips-bus/2194000.usdhc/mmc_host/mmc1/mmc1:1234/block/mmcblk1 (1231)
| |
| − | /sys/devices/soc0/soc.0/2100000.aips-bus/2194000.usdhc/mmc_host/mmc1/mmc1:1234/block/mmcblk1/mmcblk1p1 (1232)
| |
| − | /sys/devices/soc0/soc.0/2100000.aips-bus/2194000.usdhc/mmc_host/mmc1/mmc1:1234/block/mmcblk1/mmcblk1p2 (1233)
| |
| − | /sys/devices/virtual/block/loop0 (1313)
| |
| − | /sys/devices/virtual/block/loop1 (1314)
| |
| − | /sys/devices/virtual/block/loop4 (1317)
| |
| − | /sys/devices/virtual/block/loop5 (1318)
| |
| − | /sys/devices/virtual/block/loop6 (1319)
| |
| − | /sys/devices/virtual/block/loop7 (1320)
| |
| − | /sys/devices/virtual/block/ram0 (1321)
| |
| − | /sys/devices/virtual/block/ram1 (1322)
| |
| − | /sys/devices/virtual/block/ram10 (1323)
| |
| − | /sys/devices/virtual/block/ram11 (1324)
| |
| − | /sys/devices/virtual/block/ram12 (1325)
| |
| − | /sys/devices/virtual/block/ram13 (1326)
| |
| − | /sys/devices/virtual/block/ram14 (1327)
| |
| − | /sys/devices/virtual/block/ram15 (1328)
| |
| − | /sys/devices/virtual/block/ram2 (1329)
| |
| − | /sys/devices/virtual/block/ram3 (1330)
| |
| − | /sys/devices/virtual/block/ram4 (1331)
| |
| − | /sys/devices/virtual/block/ram5 (1332)
| |
| − | /sys/devices/virtual/block/ram6 (1333)
| |
| − | /sys/devices/virtual/block/ram7 (1334)
| |
| − | /sys/devices/virtual/block/ram8 (1335)
| |
| − | /sys/devices/virtual/block/ram9 (1336)
| |
| − | /sys/devices/virtual/mtd/mtd0/mtdblock0 (1340)
| |
| − | /sys/devices/virtual/mtd/mtd1/mtdblock1 (1343)
| |
| − | /sys/devices/virtual/mtd/mtd2/mtdblock2 (1346)
| |
| − | /sys/devices/virtual/mtd/mtd3/mtdblock3 (1349)
| |
| − | /sys/devices/virtual/mtd/mtd4/mtdblock4 (1352)
| |
| − | /sys/devices/virtual/mtd/mtd5/mtdblock5 (1355)
| |
| − | /sys/devices/virtual/mtd/mtd6/mtdblock6 (1358)
| |
| − | /sys/devices/virtual/mtd/mtd7/mtdblock7 (1361)
| |
| − | /sys/devices/virtual/net/lo (1363)
| |
| − | /sys/devices/virtual/net/sit0 (1364)
| |
| − | bootlogd: cannot allocate pseudo tty: No such file or directory
| |
| − | FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
| |
| − | ALSA: Restoring mixer settings...
| |
| − | /usr/sbin/alsactl: load_state:1729: No soundcards found...
| |
| − | INIT: Entering runlevel: 5
| |
| − | Configuring network interfaces... fec 2188000.ethernet eth0: Freescale FEC PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
| |
| − | IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
| |
| − | done.
| |
| − | Starting Xserver
| |
| − | open /dev/fb0: No such file or directory
| |
| − | Starting system message bus: Unknown username "xuser" in message bus configuration file
| |
| − | dbus.
| |
| − | Starting Connection Manager
| |
| − | Starting Dropbear SSH server: dropbear.
| |
| − | Starting rpcbind daemon...done.
| |
| − | starting statd: done
| |
| − | Starting advanced power management daemon: No APM support in kernel
| |
| − | (failed.)
| |
| − | NFS daemon support not enabled in kernel
| |
| − | Starting syslogd/klogd: done
| |
| − | * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
| |
| − | ...done.
| |
| − | Starting Telephony daemon
| |
| − | Starting Linux NFC daemon
| |
| − | Starting OProfileUI server
| |
| − | Running local boot scripts (/etc/rc.local).
| |
| − | Starting tcf-agent: OK
| |
| − | | |
| − | Freescale i.MX Release Distro 3.14.52-1.1.0 sbc-lynx /dev/ttymxc0
| |
| − | | |
| − | sbc-lynx login: root
| |
| − | root@sbc-lynx:~#
| |
| − | </pre>
| |
| − | | |
| − | | |
| − | | |
| − | [1] <code>bootscript</code> is used to do this task.
| |
| − | | |
| − | ===Host setup===
| |
| − | As stated previously, BXELK host tools are based on a [[Managed_Virtual_Machine_(MVM)|Managed Virtual Machine]]. As indicated [[#BXELK microSD Layout|here]], microSD card delivered along with BXELK includes basic version of MVM that is the default option.
| |
| − | | |
| − | In case you choose to use the [[Managed_Virtual_Machine_(MVM)#Advanced_version|''Advanced'' version]] of the MVM instead, the <code><i>project-name</i></code> to be used is <code>lynx</code>.
| |
| − | | |
| − | Either version you choose, please follow the procedure described [[Managed_Virtual_Machine_(MVM)#Installation_and_configuration|here]] to install the MVM.
| |
| − | | |
| − | It is also worth remembering that access to git repositories is required to download target source code. To enable it, please refer to [[Accessing_DAVE_Embedded_Systems_restricted_git_repositories|this page]].
| |
| − | | |
| − | {{ImportantMessage|text=Either version of MVM is installed, it provides the tools required to build [[Building_U-Boot_(BXELK)|U-boot]] and [[Building_Linux_kernel_(BXELK)|Linux kernel]]. It does not include the tools required to run Yocto build system instead.}}
| |
| − | | |
| − | ===Target configuration for the development stage (<code>net_nfs</code>)===
| |
| − | During the development stage, the target is usually connected via Ethernet LAN to the host machine and is configured to:
| |
| − | *retrieve binary images (i.e. Linux kernel) via TFTP protocol
| |
| − | *mount the development root file system via NFS protocol. This root file system is physically in the file system of the host machine as depicted [[Deploying_Embedded_Linux_Systems#The_development_environment|here]].
| |
| − | In DAVE Embedded Systems development kits, this configuration is generally denoted as <code>net_nfs</code>. U-Boot bootloader supports this configuration. Some U-Boot environment variables are needed to set it up. They are detailed [[Booting_Linux_Kernel#Configuration_net_nfs|here]].
| |
| | | | |
| − | For more details about TFTP and NFS servers on host side, please refer to this [[Setting_up_tftp_and_nfs|page]].
| |
| − | ===Target configuration for standalone boot===
| |
| − | Please refer to [[Standalone_boot_(BXELK)|this page]].
| |
| | ==Physical devices mapping== | | ==Physical devices mapping== |
| − | Please refer to [[Physical_devices_mapping_(BXELK)|this page]]. | + | Please refer to [[Physical_devices_mapping_(BELK/BXELK)|this page]]. |
| | ==Advanced topics== | | ==Advanced topics== |
| | ===Debugging with Eclipse=== | | ===Debugging with Eclipse=== |
| | Please refer to [[Debugging with Eclipse (MVM)|this page]]. | | Please refer to [[Debugging with Eclipse (MVM)|this page]]. |
| | + | ===ConfigID feature=== |
| | + | Please refer to [[ConfigID_management_(BELK/BXELK)|this page]]. |
GET A QUOTE
ONLINE HELPDESK
