DESK-MX8M-L/General/ConfigID

From DAVE Developer's Wiki
Jump to: navigation, search
History
Issue Date Notes

2022/01/14

First DESK-MX8M-L release

2023/02/24

DESK-MX8M-L-2.0.0 release
2024/05/30 DESK-MX8M-L-4.x.x release



ConfigID[edit | edit source]

This article describes how the ConfigID is implemented in the products supported by the DESK-MX8M-L Linux Kit.

Moreover, a system is composed of the combination of a SOM and a carrier board. In this case, two ConfigIDs are used to identify the actual board configuration like it was a SOM+carrier board system.

For the sake of simplicity, the first ConfigID is denoted as SOM ConfigID, while the second one is denoted as CB ConfigID:

MITO 8M Mini[edit | edit source]

As MITO 8M Mini is a system-on-module (SOM), the typical mechanism described here is used.

...
SOM ConfigID#: 00000002
SOM UniqueID#: e317318f:1b1229d4
CB ConfigID#: 0000100a
CB UniqueID#: fb000030:4d8eea2d
Board: MX8MM-Mito8MMini on SBCX
...

ORCA[edit | edit source]

As ORCA is a system-on-module (SOM), the typical mechanism described here is used.

...
SOM ConfigID#: 00000005
SOM UniqueID#: 0002aaff:8aefcecd
CB ConfigID#: 00001001
CB UniqueID#: da000011:0dd2e72d
Board: MX8MP-Mito8MPlus on SBC ORCA
...

Generally speaking[edit | edit source]

  • SOM ConfigID is used to identify the configuration of the basic features of the SOM
  • CB ConfigID is used to identify the peripherals and the I/O interfaces.


200px-Emblem-important.svg.png

NXP silicon manufacturer guarantees that processors UIDs (a.k.a. SOM UniqueID# on DESK-MX8M-L) to be unique over the whole MX8M family