MediaWiki API result

This is the HTML representation of the JSON format. HTML is good for debugging, but is unsuitable for application use.

Specify the format parameter to change the output format. To see the non-HTML representation of the JSON format, set format=json.

See the complete documentation, or the API help for more information.

{
    "batchcomplete": "",
    "continue": {
        "apcontinue": "BELK-AN-010:_NAND_performances",
        "continue": "-||"
    },
    "query": {
        "allpages": [
            {
                "pageid": 381,
                "ns": 0,
                "title": "BELK"
            },
            {
                "pageid": 514,
                "ns": 0,
                "title": "BELK-AN-001: Asymmetric Multiprocessing (AMP) on Bora \u2013 Linux FreeRTOS"
            },
            {
                "pageid": 515,
                "ns": 0,
                "title": "BELK-AN-002: Trace on the Bora AMP (Linux + FreeRTOS) system"
            },
            {
                "pageid": 510,
                "ns": 0,
                "title": "BELK-AN-003: Interfacing DDR3 SDRAM to PL"
            },
            {
                "pageid": 517,
                "ns": 0,
                "title": "BELK-AN-004: Interfacing BoraEVB/BoraXEVB to TFT LCD display"
            },
            {
                "pageid": 520,
                "ns": 0,
                "title": "BELK-AN-005: Interfacing BoraEVB to thin film electroluminescent display"
            },
            {
                "pageid": 527,
                "ns": 0,
                "title": "BELK-AN-006: Enabling dual Gigabit Ethernet support on BoraEVB/BoraXEVB"
            },
            {
                "pageid": 925,
                "ns": 0,
                "title": "BELK-AN-007: Asymmetric Multiprocessing (AMP) on Bora/BoraX with OpenAMP"
            },
            {
                "pageid": 1131,
                "ns": 0,
                "title": "BELK-AN-008: Programming the FPGA Bitstream with U-Boot"
            },
            {
                "pageid": 1228,
                "ns": 0,
                "title": "BELK-AN-009: Using Visual Studio Code for remote debugging"
            }
        ]
    }
}